Common Use
How To Get High Quality WPHY 65 Fittings?
The fittings in the WPHY 65 Fittings are built of wrought high tensile but less carbon alloyed stainless steel. Nickel, chromium, and copper are the most abundant elements in WPHY 65.
In the water system, gas pipelines, and other sectors, pipe fittings are frequently utilised. The pipe fittings are constructed from plastic, copper, and stainless steel. The dimensions and shapes of pipe fittings vary. Therefore, consumers should take into account both the cost of the pipe fittings as well as the importance of the service when selecting pipe fitting suppliers.
What Are The Advantages Of Carbon Steel WPHY 65 Elbow?
Aside from its remarkable malleability, Carbon Steel WPHY 65 Elbow has excellent erosion resistance, extraordinarily high solidity, and excellent toughness. Because the ASTM A860 grade WPHY 65 buttweld elbow may sustain high pressure, it is used in applications requiring good quality. For example, the A860 WPHY 65 pipe fittings are commonly used in the high-pressure oil and gasoline transportation systems.
Furthermore, their ability to work well under load and ability to withstand high pressure makes them lucrative to the marine.
MSS SP75 WPHY Grade 65 Tee vs WPHY 65 End Cap: What’s the Difference?
MSS SP75 WPHY Grade 65 Tee is composed of carbon steel with a minimum yield value of 65ksi. The pipe's name denotes the yield point in ksi.A pipe tee is used to disperse or collect the water from the run pipe. It is a short portion of pipe having a single, 90-degree branch in the middle.In piping, equal or straight tees and reducing or unequal tees are both employed.
The cap covers the end of the pipe.At the system's dead end, pipe covers are employed. In piping headers for upcoming connections, it is also utilised.
Table of content
WPHY 65 Fittings
Size
SCH
Types
ASME
ASTM A860 WPHY 65 High Yield Fittings Properties
Common Use
Yield Strength
Tensle Strength
ASTM A860 WPHY 65 Specification
Specification | WPHY 65 Fittings |
---|---|
Use In | Marine & dredging Sanitation Process Instrumentation Oil and Gas Petrochemical/ Refinery/Chemical Power etc. |
Types | Buttweld Elbow (45 Deg Elbow/ 90 Deg Elbow/ 180 Deg Elbow/ With Long Radius & Short Radius Elbow) Buttweld Tee ( Reducing Tee, Equal Tee, Unequal Tee, Lateral Tee, Straight Tee, Barred Tee, Split Tee) Buttweld Cap (Square Cap/ Round Cap/ Rectangular Cap/ “U” Shape Cap/ “I” Shape Cap/ Oval End) Buttweld Reducer (Eccentric Reducer And Concentric Reducer) Buttweld Cross (Reducing & Equal Cross) Buttweld Bend ( Long Radius Bend/ 3D Bend/ 5D Bend) |
Available Coating | Oil Black Paint Yellow Transparent Anti-rust Paint Zinc Plated Cold and Hot Dip Galvanized |
Testing | Hydrostatic testing machine Magnetic particle detector Direct-reading Spectrograph UI trasonic flaw detector |
Transportation In | Air & Ocean |
Size Of Manufacturer | BW (Buttweld) 1½" NB to 80" NB SMLS (Seamless) 4” to 24” Weld (Welded) 2” to 36” |
Fittings Connection Types | Buttweld/ Threaded and Instrumentation/ Hydraulic/ Forged |
Types Of Schedule | SCH 5S To SCH XXS |
Available Packing | Packing In Plywood Box And Plywood Pallet |
Brand Name | Schulzmann |
Certificate | ISO |
Payment Type | L/C,T/T,D/P,Paypal |
Manufacturing Productivity | 500 ton per month |
Supply Ability | 300 Ton Per Month |
Equipment | Pushing Machine Press machine electric bevelling machine |
Description | Price In US ($) |
---|---|
ASTM A860-WPHY 65, 18 X 16 X 15.88MM/21.44MM UNEQUAL TEE | US $825.54 Per KG |
90 ELBOWS, WPHY 65, WELDED, SIZE:48 INCH THK. 30.2 MM | US $10703.67 Per KG |
RED. TEES, WPHY 65, 48 INCH X 24 INCH THK. 32.2 MM X SCH.80 | US $35358.62 Per KG |
CAP, WPHY 65, WELDED, SIZE:48 INCH THK. 30.2 MM ASME B16.9 | US $4140.32 Per KG |
RED. TEES, WELDED, SIZE:48 INCH X 30 INCH THK. 32.2 MM X 20.6MM | US $39306.76 Per KG |
90 ELBOWS, WPHY 65, WELDED FITTINGS, SIZE:30 INCH THK. 20.6 MM | US $66618.85 Per KG |
EQUAL TEES, WPHY 65, WELDED FITTINGS, SIZE:30 INCH THK. 20.6 MM | US $2384.61 Per KG |
RED. TEES, WPHY 65, SIZE:30 INCH X 20.INCH THK. 20.6 MM X SCH.80 | US $11816.49 Per KG |
SEAMLESS FITTING, CARBON STEEL, WPHY 65 8 X SCH. 140, EQ. TEE | US $4153.14 Per KG |
CARBON STEEL, SEAMLESS, WPHY 65, 16 X 8 X SCH. 160/140 RED. TEE | US $9441.19 Per KG |
SEAMLESS, CS, WPHY 65, 8 X SCH. 140, 90 DEG. LR ELBOW | US $8129.26 Per KG |
CARBON STEEL, SMLS, WPHY65, 8 X SCH. 140, 45 DEG. LR ELBOW | US $968.57 Per KG |
30 X 14 27.0/S.80 TEE, ASTM A860 WPHY65 | US $7752.56 Per KG |
34.0MM, CAP, ASTM A860 WPHY65, | US $1824.73 Per KG |
A860 WPHY-65, BW, UNEQUAL TEE, 8.7X17.48MM WT 18X16 | US $1134.04 Per KG |
Types Of ASTM A860 WPHY 65 High Yield Carbon Steel Fittings
High-yield 65 Pipe Fittings
ASTM A860 WPHY 65 Elbow
WPHY 65 Carbon Steel Buttweld Fittings
ASTM A860 WPHY 65 Buttweld Fittings
ASTM A860 High Yield 65 Seamless Fittings
Astm A860 WPHY 65 Buttweld Pipe Fittings
A860 MSS SP 75 WPHY 65 Stub End
Mss Sp75 Wphy 65 End Cap
Grade Wphy 65 Pipe Bend
WPHY 65 Elbows
High Strength Buttweld 65 Tee
WPHY 65 Concentric Reducer
Carbon Steel 65 Fittings
A860 WPHY 65 Pipe Fittings
Mss Sp75 Wphy 65 Elbow
WPHY 65 Fittings Heat Treatment
ASTM A860 WPHY 65 Bend Dimensions
Long Radius Bend
NPS | O.D. | I.D. | WT | Center-To-End | SCH | Weight In Pounds |
1/2 | 0.84 | 0.622 | 0.109 | 1.5 | 40 | 0.16 |
3/4 | 1.05 | 0.824 | 0.113 | 1.5 | 40 | 0.17 |
1 | 1.32 | 1.049 | 0.133 | 1.5 | 40 | 0.4 |
1 1/4 | 1.66 | 1.38 | 0.14 | 1.88 | 40 | 0.55 |
1 1/2 | 1.9 | 1.61 | 0.145 | 2.25 | 40 | 0.8 |
2 | 2.38 | 2.07 | 0.154 | 3 | 40 | 1.6 |
2 1/2 | 2.88 | 2.47 | 0.203 | 3.75 | 40 | 3.2 |
3 | 3.5 | 3.07 | 0.216 | 4.5 | 40 | 4.8 |
3 1/2 | 4 | 3.55 | 0.226 | 5.25 | 40 | 6.6 |
4 | 4.5 | 4.03 | 0.237 | 6 | 40 | 8.9 |
5 | 5.56 | 5.05 | 0.258 | 7.5 | 40 | 15.1 |
6 | 6.62 | 6.07 | 0.28 | 9 | 40 | 24 |
8 | 8.62 | 7.98 | 0.322 | 12 | 40 | 47.8 |
10 | 10.75 | 10.02 | 0.365 | 15 | 40 | 83.4 |
12 | 12.75 | 12 | 0.375 | 18 | * | 123 |
14 | 14 | 13.25 | 0.375 | 21 | 30 | 155 |
16 | 16 | 15.25 | 0.375 | 24 | 30 | 206 |
18 | 18 | 17.25 | 0.375 | 27 | * | 262 |
20 | 20 | 19.25 | 0.375 | 30 | 20 | 324 |
24 | 24 | 23.25 | 0.375 | 36 | 20 | 466 |
30 | 30 | 29.25 | 0.375 | 45 | * | 720 |
36 | 36 | 35.25 | 0.375 | 54 | * | 1,039 |
42 | 42 | 41.25 | 0.375 | 63 | * | 1,420 |
48 | 48 | 47.25 | 0.375 | 72 | * | 2,000 |
Weight Of MSS SP 75 Wphy 65 Reducer In KG
Normal Size | LBS (Weight) | KG (Weight) |
3/4-1/2 | 0.17 | 0.08 |
3/4-3/8 | 0.15 | 0.07 |
1-3/4 | 0.4 | 0.18 |
1-1/2 | 0.4 | 0.18 |
1.1/4-1 | 0.5 | 0.23 |
1.1/4-3/4 | 0.4 | 0.18 |
1.1/4-1/2 | 0.4 | 0.18 |
1.1/2-1.1/4 | 0.7 | 0.32 |
1.1/2-1 | 0.62 | 0.28 |
1.1/2-3/4 | 0.54 | 0.24 |
1.1/2-1/2 | 0.5 | 0.23 |
2-1.1/2 | 0.9 | 0.41 |
2-1.1/4 | 0.84 | 0.38 |
2-1 | 0.76 | 0.34 |
2-3/4 | 0.7 | 0.32 |
2.1/2-2 | 1.5 | 0.68 |
2.1/2-1.1/2 | 1.38 | 0.63 |
2.1/2-1.1/4 | 1.25 | 0.57 |
2.1/2-1 | 1.25 | 0.57 |
3-2.1/2 | 2 | 0.91 |
3-2 | 1.8 | 0.82 |
3-1.1/2 | 1.7 | 0.77 |
3-1.1/4 | 1.6 | 0.73 |
3.1/2-3 | 3.15 | 1.43 |
3.1/2-2.1/2 | 2.88 | 1.31 |
3.1/2-2 | 2.75 | 1.25 |
3.1/2-1.1/2 | 2.5 | 1.13 |
3.1/2-1.1/4 | 2.4 | 1.09 |
4-3.1/2 | 3.5 | 1.59 |
4-3 | 3.38 | 1.53 |
4-2.1/2 | 3.25 | 1.47 |
4-2 | 3 | 1.36 |
4-1.1/2 | 2.88 | 1.31 |
5-4 | 6 | 2.72 |
5-3.1/2 | 5.75 | 2.61 |
5-3 | 5.5 | 2.49 |
5-2.1/2 | 5.25 | 2.38 |
5-2 | 5 | 2.27 |
6-5 | 8.5 | 3.86 |
6-4 | 8.25 | 3.74 |
6-3.1/2 | 8.25 | 3.74 |
6-3 | 8 | 3.63 |
6-2.1/2 | 7.25 | 3.29 |
8-6 | 13.2 | 5.99 |
8-5 | 12 | 5.44 |
8-4 | 11 | 4.99 |
8-3.1/2 | 11 | 4.99 |
10-8 | 22 | 9.98 |
10-6 | 21.5 | 9.75 |
10-5 | 21 | 9.53 |
10-4 | 20 | 9.07 |
12-10 | 34 | 15.42 |
12-8 | 32 | 14.51 |
12-6 | 31 | 14.06 |
12-5 | 30 | 13.61 |
14-12 | 60 | 27.22 |
14-10 | 59.2 | 26.85 |
14-8 | 58.5 | 26.54 |
14-6 | 58 | 26.31 |
16-14 | 71 | 32.21 |
16-12 | 70 | 31.75 |
16-10 | 69.5 | 31.52 |
16-8 | 68.5 | 31.07 |
16-6 | - | - |
18-16 | 85 | 38.56 |
18-14 | 84 | 38.1 |
18-12 | 83 | 37.65 |
18-10 | 82 | 37.19 |
18-8 | - | - |
20-18 | 125 | 56.7 |
20-16 | 124 | 56.25 |
20-14 | 122 | 55.34 |
20-12 | 120 | 54.43 |
20-10 | - | - |
20-8 | - | - |
22-20 | 142 | 64.41 |
22-18 | 138 | 62.6 |
22-16 | 131 | 59.42 |
22-14 | 123 | 55.79 |
22-12 | - | - |
22-10 | - | - |
24-22 | - | - |
24-20 | 150 | 68.04 |
24-18 | 148 | 67.13 |
24-16 | 145 | 65.77 |
24-14 | - | - |
24-12 | - | - |
24-10 | - | - |
26-24 | 207 | 93.89 |
26-22 | 200 | 90.72 |
26-20 | 190 | 86.18 |
26-18 | 182 | 82.55 |
26-16 | - | - |
26-14 | - | - |
26-12 | - | - |
28-26 | 224 | 101.6 |
28-24 | 216 | 97.98 |
28-22 | 210 | 95.25 |
28-20 | 199 | 90.26 |
30-28 | 241 | 109.32 |
30-26 | 232 | 105.23 |
30-24 | 224 | 101.6 |
30-22 | 220 | 99.79 |
30-20 | 220 | 99.79 |
Manufacturing Procedures Of A860 WPHY 65 Pipe Fittings
Wall Thickness Of WPHY 65 Pipe Elbow
NPS | Number Of SCH | O.D. In inches MM | WT In inches mm | Mass lb/ft kg/m |
---|---|---|---|---|
1/8 6 | 5S | 0.405 10.3 | ... | ... |
1/8 6 | 10S | 0.405 10.3 | 0.049 1.24 | 0.19 0.28 |
1/8 6 | 40S | 0.405 10.3 | 0.068 1.73 | 0.24 0.37 |
1/8 6 | 80S | 0.405 10.3 | 0.095 2.41 | 0.31 0.47 |
1/4 8 | 5S | 0.540 13.7 | ... | ... |
1/4 8 | 10S | 0.540 13.7 | 0.065 1.65 | 0.33 0.49 |
1/4 8 | 40S | 0.540 13.7 | 0.088 2.24 | 0.43 0.63 |
1/4 8 | 80S | 0.540 13.7 | 0.119 3.02 | 0.54 0.80 |
3/8 10 | 5S | 0.675 17.1 | ... | ... |
3/8 10 | 10S | 0.675 17.1 | 0.065 1.65 | 0.42 0.63 |
3/8 10 | 40S | 0.675 17.1 | 0.091 2.31 | 0.57 0.84 |
3/8 10 | 80S | 0.675 17.1 | 0.126 3.20 | 0.74 1.10 |
1/2 15 | 5S | 0.840 21.3 | 0.065 1.65 | 0.54 0.80 |
1/2 15 | 10S | 0.840 21.3 | 0.083 2.11 | 0.67 1.00 |
1/2 15 | 40S | 0.840 21.3 | 0.109 2.77 | 0.85 1.27 |
1/2 15 | 80S | 0.840 21.3 | 0.147 3.73 | 1.09 1.62 |
3/4 20 | 5S | 1.050 26.7 | 0.065 1.65 | 0.68 1.02 |
3/4 20 | 10S | 1.050 26.7 | 0.083 2.11 | 0.86 1.28 |
3/4 20 | 40S | 1.050 26.7 | 0.113 2.87 | 1.13 1.69 |
3/4 20 | 80S | 1.050 26.7 | 0.154 3.91 | 1.48 2.20 |
1 25 | 5S | 1.315 33.4 | 0.065 1.65 | 0.68 1.02 |
1 25 | 10S | 1.315 33.4 | 0.083 2.11 | 0.86 1.28 |
1 25 | 40S | 1.315 33.4 | 0.133 3.38 | 1.68 2.50 |
1 25 | 80S | 1.315 33.4 | 0.179 4.55 | 2.17 3.24 |
1-1/4 32 | 5S | 1.660 42.2 | 0.065 1.65 | 1.11 1.65 |
1-1/4 32 | 10S | 1.660 42.2 | 0.109 2.77 | 1.81 2.69 |
1-1/4 32 | 40S | 1.660 42.2 | 0.140 3.56 | 2.27 3.39 |
1-1/4 32 | 80S | 1.660 42.2 | 0.191 4.85 | 3.00 4.47 |
1-1/2 40 | 5S | 1.900 48.3 | 0.065 1.65 | 1.28 1.90 |
1-1/2 40 | 10S | 1.900 48.3 | 0.109 2.77 | 2.09 3.11 |
1-1/2 40 | 40S | 1.900 48.3 | 0.145 3.68 | 2.72 4.05 |
1-1/2 40 | 80S | 1.900 48.3 | 0.200 5.08 | 3.63 5.41 |
2 50 | 5S | 2.375 60.3 | 0.065 1.65 | 1.61 2.39 |
2 50 | 10S | 2.375 60.3 | 0.109 2.77 | 2.64 3.93 |
2 50 | 40S | 2.375 60.3 | 0.154 3.91 | 3.66 5.44 |
2 50 | 80S | 2.375 60.3 | 0.218 5.54 | 5.03 7.48 |
2-1/2 65 | 5S | 2.875 73 | 0.083 2.11 | 2.48 3.69 |
2-1/2 65 | 10S | 2.875 73 | 0.120 3.05 | 3.53 5.26 |
2-1/2 65 | 40S | 2.875 73 | 0.203 5.16 | 5.80 8.63 |
2-1/2 65 | 80S | 2.875 73 | 0.276 7.01 | 7.67 11.41 |
3 80 | 5S | 3.500 88.9 | 0.083 2.11 | 3.03 4.52 |
3 80 | 10S | 3.500 88.9 | 0.120 3.05 | 4.34 6.46 |
3 80 | 40S | 3.500 88.9 | 0.216 5.49 | 7.58 11.29 |
3 80 | 80S | 3.500 88.9 | 0.300 7.62 | 10.26 15.27 |
3-1/2 90 | 5S | 4.000 101.6 | 0.083 2.11 | 3.48 5.18 |
3-1/2 90 | 10S | 4.000 101.6 | 0.120 3.05 | 4.98 7.41 |
3-1/2 90 | 40S | 4.000 101.6 | 0.226 5.74 | 9.12 13.57 |
3-1/2 90 | 80S | 4.000 101.6 | 0.318 8.08 | 12.52 18.64 |
4 100 | 5S | 4.500 114.3 | 0.083 2.11 | 3.92 5.84 |
4 100 | 10S | 4.500 114.3 | 0.120 3.05 | 5.62 8.37 |
4 100 | 40S | 4.500 114.3 | 0.237 6.02 | 10.80 16.08 |
4 100 | 80S | 4.500 114.3 | 0.337 8.56 | 15.00 22.32 |
5 125 | 5S | 5.563 141.3 | 0.109 2.77 | 6.36 9.46 |
5 125 | 10S | 5.563 141.3 | 0.134 3.40 | 7.78 11.56 |
5 125 | 40S | 5.563 141.3 | 0.258 6.55 | 14.63 21.77 |
5 125 | 80S | 5.563 141.3 | 0.375 9.53 | 20.80 30.97 |
6 150 | 5S | 6.625 168.3 | 0.109 2.77 | 7.59 11.31 |
6 150 | 10S | 6.625 168.3 | 0.134 3.40 | 9.30 13.83 |
6 150 | 40S | 6.625 168.3 | 0.280 7.11 | 18.99 28.26 |
6 150 | 80S | 6.625 168.3 | 0.432 10.97 | 28.60 42.56 |
Vanadium | ≤0.10 |
Columbium | ≤0.04 |
Phosphorus | ≤0.030 |
Sulfur | ≤0.010 |
Carbon | ≤0.20*A |
Manganese | 1.00-1.45 |
Vanadium plus Columnium | ≤0.12 |
Silicon | 0.15-0.40*B |
Copper | ≤0.35*C |
Aluminum | ≤0.06 |
Titanium | ≤0.05 |
Nickel | ≤0.50*C |
Molybdenum | ≤0.25*C |
Chromium | ≤0.30*C |
ASTM A860 WPHY 65 Mechanical Properties
ASTM A860 | Yield Strength, (min.) | Tensile Strength | Elongation, (min.) | Cv, avg./(min.) | |||
---|---|---|---|---|---|---|---|
Grade | MPa | % | ft*lbs | J | ksi | MPa | ksi |
WPHY 65 Fittings | 530-705 | 20 | 30/25 | 40/34 | 65 | 450 | 77-102 |