W
How To Buy A WPHY 42 Fittings
Manganese, phosphorus, and copper are alloyants found in the A860 WPHY 42 material. This alloy contains trace quantities of metals such as titanium, aluminium, molybdenum, and niobium. The alloy's yield value is 415 Mpa. The tensile strength varies from 515 Mpa - 690 Mpa. ASTM A860 WPHY 42 has an elasticity of 28%. The manufacturing method of A860 WPHY 42 comprises heat treatment. They could be heat treated in a variety of ways, including normalising, tempering, quenching, and stress relief.
Furthermore, these WPHY 42 Fittings are treated. Surface cleaning of WPHY 42 fittings comprises treating the surface with rust resistant back oil, clear oil, or hot galvanization. The WPHY 42 elbow's surface preparation increases its corrosion resistance.
What Are The Types Of MSS SP75 WPHY 42 Fittings?
Because of their capacity to tolerate high temperatures and pressure, these fittings meet the needs of a wide range of industries. The elbow Fittings are commonly used in high-pressure liquid transport networks to transmit gas and oil.
Aside from oil and gas, typical MSS SP75 WPHY 42 Fittings use comprise pharmaceutical gear. It also includes specialty chemicals, sea water hardware, offshore oil drilling firms, petrochemicals, pulp and paper businesses.
The A860 WPHY 42 fittings include pipe connections, caps, elbows, ferrules, crossings, bends, and others. There are several grades, lengths, end connections, and diameters to choose from. The A860 WPHY 42 fitting options include seamless, EFW, welded, and fabricated.
Advantages And Disadvantages Of High Yield Pipe Fittings
The High Yield Pipe Fittings types include seamless, EFW, welded, and fabricated. There are many benefits of using this fitting. Socket weld fittings are unsuitable for UHP pressure uses in the food sector.Since they do not allow full entry and create overlaps and gaps that are hard to clean, resulting in virtual breaches.
Table of content
WPHY 42 Fittings
Size
SCH
Types
ASME
Full Form Of WPHY
W
P
H
Y
ASTM A420 Wpl6 Fittings Specification
Specification | WPHY 42 Fittings |
---|---|
Testing | Hydrostatic testing machine Magnetic particle detector Direct-reading Spectrograph UI trasonic flaw detector |
Available Packing | Packing In Plywood Box And Plywood Pallet |
Brand Name | Schulzmann |
Certificate | ISO |
Use In | Marine & dredging Sanitation Process Instrumentation Oil and Gas Petrochemical/ Refinery/Chemical Power etc. |
Fitting Connection Types | Buttweld/ Threaded and Instrumentation/ Hydraulic/ Forged |
Equipment | Pushing Machine Press machine electric bevelling machine |
Types Of A860 Wphy 42 Pipe Fittings manufacturer in UAE | Buttweld Elbow (45 Deg Elbow/ 90 Deg Elbow/ 180 Deg Elbow/ With Long Radius & Short Radius Elbow) Buttweld Tee ( Reducing Tee, Equal Tee, Unequal Tee, Lateral Tee, Straight Tee, Barred Tee, Split Tee) Buttweld Cap (Square Cap/ Round Cap/ Rectangular Cap/ “U” Shape Cap/ “I” Shape Cap/ Oval End) Buttweld Reducer (Eccentric Reducer And Concentric Reducer) Buttweld Cross (Reducing & Equal Cross) Buttweld Bend ( Long Radius Bend/ 3D Bend/ 5D Bend) |
Types Of Schedule | SCH 5S To SCH XXS |
Available Coating | Oil Black Paint Yellow Transparent Anti-rust Paint Zinc Plated Cold and Hot Dip Galvanized |
Transportation In | Air & Ocean |
Size Of Manufacturer | BW (Buttweld) 1½" NB to 80" NB SMLS (Seamless) 4” to 24” Weld (Welded) 2” to 36” |
Payment Type | L/C,T/T,D/P,Paypal |
Manufacturing Productivity | 800 ton per month |
Supply Ability | 500 Ton Per Month |
ASTM A860 WPHY 42 Pipe Fittings Price List
Description | Price In US ($) |
---|---|
TEE EQ, BW,MSS-SP-75, WPHY-42, S80, 2 INCH | US $13.70 Per KG |
CAP BW, MSS-SP-75, WPHY-42, STD, 3 INCH | US $36.60 Per KG |
CAP BW, B16.9, WPHY-42, S80 0.75 INCH | US $81.60 Per KG |
MSS-SP-75, ASTM A860 WPHY-42, TEE 15.9 X 14.3MM WT 52 X 42 | US $11596.35 Per KG |
A860 WPHY-42, TEE 14.3 X 14.3MM WT 46 X 42 | US $3804.00 Per KG |
MSS-SP-75, WPHY-42, CON RED 15.9 X 14.3MM WT L=711MM 48 X 42 | US $1200.96 Per KG |
REDUCING TEE, SIZE: 6 X 2, SCH 40, WPHY-42 Buttweld | US $214.97 Per KG |
MSS-SP-75, WPHY-42, REDUCING TEE, SIZE: 6 X 5, SCH 40, Buttweld | US $316.60 Per KG |
Types Of WPHY 42 Carbon Steel Buttweld Fittings
WPHY 42 Elbow
High Strength Buttweld 42 Tee
WPHY 42 Concentric Reducer
A860 MSS SP 75 WPHY 42 Stub End
Mss Sp75 Wphy 42 End Cap
Grade Wphy 42 Pipe Bend
Carbon Steel 42 Fittings
A860 WPHY 42 Pipe Fitting
Mss Sp75 Wphy 42 Elbow
High-yield Pipe Fittings
ASTM A860 WPHY 42 Elbow
WPHY 42 Carbon Steel Buttweld Fitting
ASTM A860 WPHY 42 Buttweld Fitting
ASTM A860 High Yield Seamless Fitting
Astm A860 WPHY 42 Buttweld Pipe Fitting
High Yield Fittings Chemical Composition
Grade | WPHY 42 Fittings |
---|---|
Mo | 0.30 |
Cu | 0.25 |
Ti | 0.35 |
V | 0.05 |
Mn | 0.20 |
P | 1.00 – 1.45 |
S | 0.03 |
Si | 0.01 |
Ni | 0.15 – 0.40 |
Cr | 0.50 |
Cb | 0.10 |
C | – |
Al | 0.04 |
A860 WPHY 42 Buttweld Fittings Mechanical Properties
Element | WPHY 42 Fittings |
---|---|
Tensile Strength | 515 – 690 |
Elongation | 28 % |
Yield Strength (0.2%Offset) | 415 |
Raw Materials for Producing ASTM A860 WPHY 42 Fittings
ASME A860 Carbon Steel Fittings Hardness
ASTM A860 Wphy 42 Buttweld Fittings shall have a maximum hardness of 22 HRC (235 HBW).
Normal Size Of Pipe In Inches | Outside Diameter | WT | 90 Deg Elbow | 90 Deg Returns |
45 Deg Elbow |
Buttweld Tee | Buttweld Cap | Buttweld Cross | Buttweld Stub Ends | ||||||
ST | XS | 160 | XX |
Long Radius (A) |
Short Radius (A) |
Long Radius (K) |
Short Radius (K) |
(B) | (C) | (E) | (C) | (F) | (G) | ||
1/2 | 0.840 | 0.109 | 0.147 | - | - | 1-1/2 | - | 1-15/16 | - | 5/8 | 1 | 1 | - | 3 | 1-3/8 |
3/4 | 1.050 | 0.113 | 0.154 | - | 0.308 | 1-1/8 | - | 1-11/16 | - | 7/16 | 1-1/8 | 1-1/4 | - | 3 | 1-11/16 |
1 | 1.315 | 0.133 | 0.179 | 0.250 | 0.358 | 1-1/2 | 1 | 2-3/16 | 1-5/8 | 7/8 | 1-1/2 | 1-1/2 | - | 4 | 2 |
1-1/4 | 1.660 | 0.140 | 0.191 | 0.250 | 0.382 | 1-7/8 | 1-1/4 | 2-3/4 | 2-11/16 | 1 | 1-7/8 | 1-1/2 | 1-7/8 | 4 | 2-1/2 |
1-1/2 | 1.900 | 0.145 | 0.200 | 0.281 | 0.400 | 2-1/4 | 1-1/2 | 3-1/4 | 2-7/16 | 1-1/8 | 2-1/4 | 1-1/2 | 2-1/4 | 4 | 2-7/8 |
2 | 2.375 | 0.154 | 0.218 | 0.344 | 0.436 | 3 | 2 | 4-3/16 | 3-3/16 | 1-3/8 | 2-1/2 | 1-1/2* | 2-1/2 | 6 | 3-5/8 |
2-1/2 | 2.875 | 0.203 | 0.276 | 0.375 | 0.552 | 3-3/4 | 2-1/2 | 5-3/16 | 3-15/16 | 1-3/4 | 3 | 1-1/2 | 3 | 6 | 4-1/8 |
3 | 3.500 | 0.216 | 0.300 | 0.438 | 0.600 | 4-1/2 | 3 | 6-1/4 | 4-3/4 | 2 | 3-3/8 | 2* | 3-3/8 | 6 | 5 |
3-1/2 | 4.000 | 0.226 | 0.318 | - | 0.636 | 5-1/4 | 3-1/2 | 7-1/4 | 5-1/2 | 2-1/4 | 3-3/4 | 2-1/2* | 3-3/4 | 6 | 5-1/2 |
4 | 4.500 | 0.237 | 0.337 | 0.531 | 0.674 | 6 | 4 | 8-1/4 | 6-1/4 | 2-1/2 | 4-1/8 | 2-1/2* | 4-1/8 | 6 | 6-3/16 |
5 | 5.563 | 0.258 | 0.375 | 0.625 | 0.750 | 7-1/2 | 5 | 10-5/16 | 7-3/4 | 3-1/8 | 4-7/8 | 3* | 4-7/8 | 8 | 7-5/16 |
6 | 6.625 | 0.280 | 0.432 | 0.719 | 0.864 | 9 | 6 | 12-5/16 | 9-5/16 | 3-3/4 | 5-5/8 | 3-1/2* | 5-5/8 | 8 | 8-1/2 |
8 | 8.625 | 0.322 | 0.500 | 0.906 | 0.875 | 12 | 8 | 16-5/16 | 12-5/16 | 5 | 7 | 4* | 7 | 8 | 10-5/8 |
10 | 10.750 | 0.365 | 0.500 | 1.125 | 1.000 | 15 | 10 | 20-3/8 | 15-3/8 | 6-1/4 | 8-1/2 | 5* | 8-1/2 | 10 | 12-3/4 |
12 | 12.750 | 0.375 | 0.500 | 1.312 | 1.000 | 18 | 12 | 24-3/8 | 18-3/8 | 7-1/2 | 10 | 6* | 10 | 10 | 15 |
14 | 14.000 | 0.375 | 0.500 | - | - | 21 | 14 | 28 | 21 | 8-3/4 | 11 | 6-1/2* | 11 | 12 | 16-1/4 |
16 | 16.000 | 0.375 | 0.500 | - | - | 24 | 16 | 32 | 24 | 10 | 12 | 7* | 12 | 12 | 18-1/2 |
18 | 18.000 | 0.375 | 0.500 | - | - | 27 | 18 | 36 | 27 | 11-1/4 | 13-1/2 | 8* | 13-1/2 | 12 | 21 |
20 | 20.000 | 0.375 | 0.500 | - | - | 30 | 20 | 40 | 30 | 12-1/2 | 15 | 9* | 15 | 12 | 23 |
22 | 22.000 | 0.375 | 0.500 | - | - | 33 | - | 44 | - | 13-1/2 | 16-1/2 | 10 | 16-1/2 | - | - |
24 | 24.000 | 0.375 | 0.500 | - | - | 36 | 24 | 48 | 36 | 15 | 17 | 10-1/2 | 17 | 12 | 27-1/4 |
26 | 26.000 | 0.375 | 0.500 | - | - | 39 | - | 52 | - | 16 | 19-1/2 | 10-1/2 | 19-1/2 | - | - |
30 | 30.000 | 0.375 | 0.500 | - | - | 45 | 30 | 60 | 45 | 18-1/2 | 22 | 10-1/2 | 22 | - | - |
34 | 34.000 | 0.375 | 0.500 | - | - | 51 | - | - | - | 21 | 25 | 10-1/2 | 25 | — | — |
36 | 36.000 | 0.375 | 0.500 | — | — | 54 | 36 | — | 54 | 22-1/4 | 26-1/2 | 10-1/2 | — | — | — |
42 | 42.000 | 0.375 | 0.500 | — | — | 63 | 42 | — | — | 26 | — | 12 | — | — | — |
Mss Sp75 WPHY 42 Tee Weight Chart
Normal Pipe Size | Weight In LBS | Weight In KG |
1/2 | 0.35 | 0.16 |
3/4 | 0.45 | 0.2 |
1 | 0.75 | 0.34 |
1.1/4 | 1.3 | 0.59 |
1.1/2 | 2 | 0.91 |
2 | 3.5 | 1.59 |
2.1/2 | 6 | 2.72 |
3 | 7 | 3.18 |
3.1/2 | 9 | 4.08 |
4 | 12 | 5.44 |
5 | 21 | 9.53 |
6 | 34 | 15.42 |
8 | 55 | 24.95 |
10 | 85 | 38.56 |
12 | 120 | 54.43 |
14 | 165 | 74.84 |
16 | 195 | 88.45 |
18 | 249 | 112.94 |
20 | 342 | 155.13 |
22 | 414 | 187.79 |
24 | 528 | 239.5 |
26 | 770 | 349.27 |
30 | 1060 | 480.81 |
36 | 1490 | 675.85 |
Hydrostatic Test Of Carbon Steel 42 Fittings
Hydrostatic testing is not required by for Wphy 42 Fittings specification.