Stainless Steel 45 Degree Elbow
45 Deg Elbow adjustments the course with the aid of using 45 degrees.
Stainless Steel Pipe Fittings suppliers in UAE
ASTM A403 elbow manufacturers in Dubai and stainless steel buttweld fittings importers in Middle East, view online price list
The Manufacturing Process: How to Make Stainless Steel Pipe Fittings?
One of the most widely used Pipe Fitting The mandrel technique. It is a type of hot forming technique, is used to make elbows from pipe.
The pipe is divided into segments and pressed with the assistance of a hydraulic cylinder in this way. An induction heating coil warms the pipe, which is then forced over a die known as a "mandrel,". It allows the pipe to stretch and bend at the same time.
This Stainless Steel Pipe Fittings technique can be employed to make elbows with a wide range of diameters.
A tube the same diameter as the completed product is forced through a die and moulded into the desired form. Typically used on stainless steel little to large size elbows.
Check Difference between SS Fittings Price In Europe and Asia
The price of each SS Fittings is determined by the components present in its chemical structure. In contrast to grade 202, stainless steel 304 alloy includes between 8% and 10.5% nickel, nearly twice as much as the former. Nickel prices are volatile because it is a traded commodity. Because these prices vary on a regular basis, including this component in alloys raises the total production cost significantly. As a result, the cost of producing austenitic stainless steel alloy 304 is greater than that of grade 202.
Check advantages of stainless steel fittings, distributors and stockists of stainless steel elbow, end cap, and pipe bend in UAE, find SS fittings price and types
Advantages of ASTM A403 Fittings
If a pipe is leaky or broken, the coupler can be utilised to fix the problem. Couplings come in two varieties, slip and tension, and have the same size on both sides. These couplings are employed in enterprises and public locations to repair long, damaged pipes.
The accessibility of several kinds of ASTM A403 Fittings has made the task of piping and plumbing easier. With less headaches about where to join and how to link to move the pipe from one location to another. The application opens opportunities to a variety of sectors. Smooth inner surfaces and modest direction shifts reduce pressure drops and turbulence while also limiting corrosion and erosion activity.
View common reasons to use stainless steel welded pipe fittings, stainless steel fittings suppliers in UAE, refer list of available machineries of SS pipe fittings
Table of content
Specialized in manufacturing
Stainless Steel Pipe Fittings
ASTM A403 Stainless Steel Pipe Fittings are used for connecting pipes and controlling the volume, direction, and pressure of the flow of liquids, fluids and gases.
Size
1/2 Inches To 48 Inches
SCH
SCH 10S To SCH 180
Types
Elbow, Tee, Reducer, End Cap
ASME
B16.9
Introduction Of ASTM A403 Elbow
Stainless Steel 90 Degree Elbow
90 deg elbows is same as LR 90 besides for the size among give up of elbows to middle line is 1x nps
Characteristics Of Industrial Stainless Steel Fittings
- High and low temperature resistant
- Long lasting, with a low lifecycle cost
- Environmentally friendly and recyclable.
- Easily fabricated
- Strong and durable
- Aesthetically attractive
Why Use Of Stainless Steel Long Radius Elbow
- Give Less Frictional Resistance To The Fluid Than Short Elbows.
- Create Lesser Pressure Drop Than Sr Elbows.
- Short Radius Is Less Costly Than Long Radius Elbows.
Machineries Of Stainless Steel Welded Pipe Fittings
- Radial Driling Machine
- Elbow Fittings Beveling Machine
- Hydraulic Press 300 Tons Capacity
- Hydraulic Press 150 Tons Capacity
- Portable Temperature Indicator
- Oil Fired Heat Treatment Furnace
- Elbow Fittings Cold Forming Machines
Stainless Steel Pipe Fittings Specifications
| Specifications | Stainless Steel Pipe Fittings |
|---|---|
| Brand Name | Schulzmann |
| Certificate | ISO |
| Size Of Manufacturer | BW (Buttweld) 1½" NB to 80" NB SMLS (Seamless) 4” to 24” Weld (Welded) 2” to 36” |
| Payment Type | L/C,T/T,D/P,Paypal |
| Equipment | Pushing Machine Press machine electric bevelling machine |
| Testing | Hydrostatic testing machine Magnetic particle detector Direct-reading Spectrograph UI trasonic flaw detector |
| Types Of Stainless Steel Pipe Fittings suppliers in UAE | Elbow (45 Deg Elbow/ 90 Deg Elbow/ 180 Deg Elbow/ With Long Radius & Short Radius Elbow) Tee ( Reducing Tee, Equal Tee, Unequal Tee, Lateral Tee, Straight Tee, Barred Tee, Split Tee) Cap (Square Cap/ Round Cap/ Rectangular Cap/ “U” Shape Cap/ “I” Shape Cap/ Oval End) Reducer (Eccentric Reducer And Concentric Reducer) Cross (Reducing & Equal Cross) Bend ( Long Radius Bend/ 3D Bend/ 5D Bend) |
| Fitting Connection Types | Buttweld/ Threaded and Instrumentation/ Hydraulic/ Forged |
| Types Of Schedule | SCH 5S To SCH XXS |
| Available Coating | Oil Black Paint Yellow Transparent Anti-rust Paint Zinc Plated Cold and Hot Dip Galvanized |
| Use In | Marine & dredging Sanitation Process Instrumentation Oil and Gas Petrochemical/ Refinery/Chemical Power etc. |
| Stainless Steel Fittings suppliers In UAE | 1500 ton per month (Manufacturing Productivity) |
| Supply Ability | 1000 Ton Per Month |
| Available Packing | Packing In Plywood Box And Plywood Pallet |
| Transportation In | Air & Ocean |
| Description | Price In US ($) |
|---|---|
| 90 ELBOWS, WP304, ASME B16.9, SMLS, SIZE 18 STD | $ US 2562.14 Per KG |
| WP304, 90 ELBOW, B16.9, SMLS, SIZE 3/4 SCH40 | US $ 190.42 Per KG |
| 90 ELBOWS, WP304, B16.9, SMLS, SIZE 16 SCH20 | US $ 136.82 Per KG |
| 2X2X1-1/2 NB, SS304/304L, SCH40, Reducing Tee | US $ 926.19 Per KG |
| A403 WP316, DN 200*150, CONCENTRIC REDUCE, SCH 40 | US $ 258.09 Per KG |
| 90 ELBOWS, SS 304, B16.9, SMLS, SIZE 12 SCH20 | US $ 1913.98 Per KG |
| 90 ELBOWS, WP304, B16.9, SMLS, SIZE 16 SCH10 | US $ 185.95 Per KG |
| WP304, 90 ELBOWS, B16.9, SMLS, SIZE 6 SCH40 | US $ 4277.45 Per KG |
| Seamless, BW Fitting :10" SCH40 CAP | US $573.80 Per KG |
| Seamless, BW Fitting :8" SCH120 CAP | US $315.65 Per KG |
| Seamless, BW Fitting :8" SCH20 CAP | US $78.66 Per PCS |
| Seamless, BW Fitting :10" SCH120 CAP | US $312.52 Per KG |
| Seamless, BW Fitting : 6" SCH160 CAP | US $267.06 Per KG |
| Equal Tee, 1 inch, Sch 160, A403 WP316, SMLS | US $ 154.47 Per KG |
| Equal, 4 inch, Sch 40/Std, A403 WP316, SMLS | US $249.05 Per KG |
| DN 100X40, SS, Con Reducer, SCH XS/80, A403 WP316 | US $ 29.35 Per PCS |
| A403 WP316, Con Reducer SCH 40, DN 150*100 | US $ 210.79 Per KG |
| DN 100X40, Con Reducer, SS, SCH XS/80, A403 WP316 | US $ 147.34 Per KG |
Top Grade Of Stainless Steel Fittings
Standard For ASTM A403 Fittings
Types Of Stainless Steel Fittings Used In Piping
Stainless Steel Buttweld Fittings
Stainless Steel Weld Fitting
Stainless Steel Buttweld Pipe Fitting
Stainless Steel Tee Fitting
Stainless Steel Elbow
Stainless Steel Reducer
Stainless Steel Cap
Stainless Steel Stub End
Stainless Steel 45 Degree Elbow
Stainless Steel 90 Degree Elbow
Stainless Steel Long Radius Elbow
Stainless Steel Short Radius Elbow
Stainless Steel Welded Pipe Fittings
ASTM A403 Fittings
SS Fittings
SCH 80 Stainless Steel Fitting
SS Pipe Fittings
SCH 40 Stainless Pipe Fitting
Stainless Steel Hydraulic Fitting
ASTM A403 Elbow
ASTM A403 Tee
ASTM A403 Reducer
ASTM A403 Pipe Cap
ASTM A403 Stub End
Common Reasons To Use Stainless Pipe Fittings
Know more about stainless steel tee weight chart, call now for custom sizes of ASME SA403 45/90/180 degree elbow, check stainless steel reducer dimensions as per ASME B16.9
Stainless Steel Pipe Fittings Dimensions
| Normal Size Of Pipe In Inches | Outside Diameter | WT | 90 Deg Elbow | 90 Deg Returns | 45 Deg Elbow | Pipe Tee | Pipe Cap | Pipe Cross | Pipe Stub Ends | ||||||
| ST | XS | 160 | XX | Long Radius (A) | Short Radius (A) | LR (K) | SR (K) | (B) | (C) | (E) | (C) | (F) | (G) | ||
| 1/2 | 0.840 | 0.109 | 0.147 | - | - | 1-1/2 | - | 1-15/16 | - | 5/8 | 1 | 1 | - | 3 | 1-3/8 |
| 3/4 | 1.050 | 0.113 | 0.154 | - | 0.308 | 1-1/8 | - | 1-11/16 | - | 7/16 | 1-1/8 | 1-1/4 | - | 3 | 1-11/16 |
| 1 | 1.315 | 0.133 | 0.179 | 0.250 | 0.358 | 1-1/2 | 1 | 2-3/16 | 1-5/8 | 7/8 | 1-1/2 | 1-1/2 | - | 4 | 2 |
| 1-1/4 | 1.660 | 0.140 | 0.191 | 0.250 | 0.382 | 1-7/8 | 1-1/4 | 2-3/4 | 2-11/16 | 1 | 1-7/8 | 1-1/2 | 1-7/8 | 4 | 2-1/2 |
| 1-1/2 | 1.900 | 0.145 | 0.200 | 0.281 | 0.400 | 2-1/4 | 1-1/2 | 3-1/4 | 2-7/16 | 1-1/8 | 2-1/4 | 1-1/2 | 2-1/4 | 4 | 2-7/8 |
| 2 | 2.375 | 0.154 | 0.218 | 0.344 | 0.436 | 3 | 2 | 4-3/16 | 3-3/16 | 1-3/8 | 2-1/2 | 1-1/2* | 2-1/2 | 6 | 3-5/8 |
| 2-1/2 | 2.875 | 0.203 | 0.276 | 0.375 | 0.552 | 3-3/4 | 2-1/2 | 5-3/16 | 3-15/16 | 1-3/4 | 3 | 1-1/2 | 3 | 6 | 4-1/8 |
| 3 | 3.500 | 0.216 | 0.300 | 0.438 | 0.600 | 4-1/2 | 3 | 6-1/4 | 4-3/4 | 2 | 3-3/8 | 2* | 3-3/8 | 6 | 5 |
| 3-1/2 | 4.000 | 0.226 | 0.318 | - | 0.636 | 5-1/4 | 3-1/2 | 7-1/4 | 5-1/2 | 2-1/4 | 3-3/4 | 2-1/2* | 3-3/4 | 6 | 5-1/2 |
| 4 | 4.500 | 0.237 | 0.337 | 0.531 | 0.674 | 6 | 4 | 8-1/4 | 6-1/4 | 2-1/2 | 4-1/8 | 2-1/2* | 4-1/8 | 6 | 6-3/16 |
| 5 | 5.563 | 0.258 | 0.375 | 0.625 | 0.750 | 7-1/2 | 5 | 10-5/16 | 7-3/4 | 3-1/8 | 4-7/8 | 3* | 4-7/8 | 8 | 7-5/16 |
| 6 | 6.625 | 0.280 | 0.432 | 0.719 | 0.864 | 9 | 6 | 12-5/16 | 9-5/16 | 3-3/4 | 5-5/8 | 3-1/2* | 5-5/8 | 8 | 8-1/2 |
| 8 | 8.625 | 0.322 | 0.500 | 0.906 | 0.875 | 12 | 8 | 16-5/16 | 12-5/16 | 5 | 7 | 4* | 7 | 8 | 10-5/8 |
| 10 | 10.750 | 0.365 | 0.500 | 1.125 | 1.000 | 15 | 10 | 20-3/8 | 15-3/8 | 6-1/4 | 8-1/2 | 5* | 8-1/2 | 10 | 12-3/4 |
| 12 | 12.750 | 0.375 | 0.500 | 1.312 | 1.000 | 18 | 12 | 24-3/8 | 18-3/8 | 7-1/2 | 10 | 6* | 10 | 10 | 15 |
| 14 | 14.000 | 0.375 | 0.500 | - | - | 21 | 14 | 28 | 21 | 8-3/4 | 11 | 6-1/2* | 11 | 12 | 16-1/4 |
| 16 | 16.000 | 0.375 | 0.500 | - | - | 24 | 16 | 32 | 24 | 10 | 12 | 7* | 12 | 12 | 18-1/2 |
| 18 | 18.000 | 0.375 | 0.500 | - | - | 27 | 18 | 36 | 27 | 11-1/4 | 13-1/2 | 8* | 13-1/2 | 12 | 21 |
| 20 | 20.000 | 0.375 | 0.500 | - | - | 30 | 20 | 40 | 30 | 12-1/2 | 15 | 9* | 15 | 12 | 23 |
| 22 | 22.000 | 0.375 | 0.500 | - | - | 33 | - | 44 | - | 13-1/2 | 16-1/2 | 10 | 16-1/2 | - | - |
| 24 | 24.000 | 0.375 | 0.500 | - | - | 36 | 24 | 48 | 36 | 15 | 17 | 10-1/2 | 17 | 12 | 27-1/4 |
| 26 | 26.000 | 0.375 | 0.500 | - | - | 39 | - | 52 | - | 16 | 19-1/2 | 10-1/2 | 19-1/2 | - | - |
| 30 | 30.000 | 0.375 | 0.500 | - | - | 45 | 30 | 60 | 45 | 18-1/2 | 22 | 10-1/2 | 22 | - | - |
| 34 | 34.000 | 0.375 | 0.500 | - | - | 51 | - | - | - | 21 | 25 | 10-1/2 | 25 | — | — |
| 36 | 36.000 | 0.375 | 0.500 | — | — | 54 | 36 | — | 54 | 22-1/4 | 26-1/2 | 10-1/2 | — | — | — |
| 42 | 42.000 | 0.375 | 0.500 | — | — | 63 | 42 | — | — | 26 | — | 12 | — | — | — |
NPS In Inches | Concentric Reducers and Eccentric Reducers | Reducing Outlet Tees | ||
H | C | M | ||
1/2 X | 1/4 | — | 1 | 1 |
3/8 | — | 1 | 1 | |
3/4 X | 3/8 | 1-1/2 | 1-1/8 | 1-1/8 |
1/2 | 1-1/2 | 1-1/8 | 1-1/8 | |
1X | 3/8 | 2 | 1-1/2 | 1-1/2 |
1/2 | 2 | 1-1/2 | 1-1/2 | |
3/4 | 2 | 1-1/2 | 1-1/2 | |
1-1/4 X | 1/2 | 2 | 1-7/8 | 1-7/8 |
3/4 | 2 | 1-7/8 | 1-7/8 | |
1 | 2 | 1-7/8 | 1-7/8 | |
1-1/2 X | 1/2 | 2-1/2 | 2-1/4 | 2-1/4 |
3/4 | 2-1/2 | 2-1/4 | 2-1/4 | |
1 | 2-1/2 | 2-1/4 | 2-1/4 | |
1-1/4 | 2-1/2 | 2-1/4 | 2-1/4 | |
2 X | 3/4 | 3 | 2-1/2 | 1-3/4 |
1 | 3 | 2-1/2 | 2 | |
1-1/4 | 3 | 2-1/2 | 2-1/4 | |
1-1/2 | 3 | 2-1/2 | 2-3/8 | |
2-1/2 X | 1 | 3-1/2 | 3 | 2-1/4 |
1-14 | 3-1/2 | 3 | 2-1/2 | |
1-1/2 | 3-1/2 | 3 | 2-5/8 | |
2 | 3-1/2 | 3 | 2-3/4 | |
3 X | 1 | — | 3-3/8 | 2-5/8 |
1-1/4 | 3-1/2 | 3-3/8 | 2-3/4 | |
1-1/2 | 3-1/2 | 3-3/8 | 2-7/8 | |
2 | 3-1/2 | 3-3/8 | 3 | |
2-1/2 | 3-1/2 | 3-3/8 | 3-1/4 | |
Stainless Steel Bend Dimensions
Long Radius Bend
| NPS | O.D. | I.D. | WT | Center-To-End | SCH | Weight In Pounds |
| 1/2 | 0.84 | 0.622 | 0.109 | 1.5 | 40 | 0.16 |
| 3/4 | 1.05 | 0.824 | 0.113 | 1.5 | 40 | 0.17 |
| 1 | 1.32 | 1.049 | 0.133 | 1.5 | 40 | 0.4 |
| 1 1/4 | 1.66 | 1.38 | 0.14 | 1.88 | 40 | 0.55 |
| 1 1/2 | 1.9 | 1.61 | 0.145 | 2.25 | 40 | 0.8 |
| 2 | 2.38 | 2.07 | 0.154 | 3 | 40 | 1.6 |
| 2 1/2 | 2.88 | 2.47 | 0.203 | 3.75 | 40 | 3.2 |
| 3 | 3.5 | 3.07 | 0.216 | 4.5 | 40 | 4.8 |
| 3 1/2 | 4 | 3.55 | 0.226 | 5.25 | 40 | 6.6 |
| 4 | 4.5 | 4.03 | 0.237 | 6 | 40 | 8.9 |
| 5 | 5.56 | 5.05 | 0.258 | 7.5 | 40 | 15.1 |
| 6 | 6.62 | 6.07 | 0.28 | 9 | 40 | 24 |
| 8 | 8.62 | 7.98 | 0.322 | 12 | 40 | 47.8 |
| 10 | 10.75 | 10.02 | 0.365 | 15 | 40 | 83.4 |
| 12 | 12.75 | 12 | 0.375 | 18 | * | 123 |
| 14 | 14 | 13.25 | 0.375 | 21 | 30 | 155 |
| 16 | 16 | 15.25 | 0.375 | 24 | 30 | 206 |
| 18 | 18 | 17.25 | 0.375 | 27 | * | 262 |
| 20 | 20 | 19.25 | 0.375 | 30 | 20 | 324 |
| 24 | 24 | 23.25 | 0.375 | 36 | 20 | 466 |
| 30 | 30 | 29.25 | 0.375 | 45 | * | 720 |
| 36 | 36 | 35.25 | 0.375 | 54 | * | 1,039 |
| 42 | 42 | 41.25 | 0.375 | 63 | * | 1,420 |
| 48 | 48 | 47.25 | 0.375 | 72 | * | 2,000 |
Stainless Steel Pipe Fittings Weight Chart
Buttweld Elbow
| Normal Pipe Size | Weight LBS | Weight Kilogram |
| 1/2 | 0.18 | 0.08 |
| 3/4 | 0.19 | 0.09 |
| 1 | 0.4 | 0.18 |
| 1.1/4 | 0.6 | 0.27 |
| 1.1/2 | 0.9 | 0.41 |
| 2 | 1.6 | 0.73 |
| 2.1/2 | 3.25 | 1.47 |
| 3 | 5 | 2.27 |
| 3.1/2 | 6.75 | 3.06 |
| 4 | 9 | 4.08 |
| 5 | 15 | 6.8 |
| 6 | 24.5 | 11.11 |
| 8 | 50 | 22.68 |
| 10 | 88 | 39.92 |
| 12 | 125 | 56.7 |
| 14 | 160 | 72.57 |
| 16 | 206 | 93.44 |
| 18 | 260 | 117.93 |
| 20 | 320 | 145.15 |
| 22 | 394 | 178.72 |
| 24 | 460 | 208.65 |
| 26 | 550 | 249.48 |
| 30 | 734 | 332.94 |
| 36 | 1062 | 481.72 |
| ASME B16.9 Type | 45 And 90 degree elbow | 180 Degree Returns | |||||
| NPS | Outside Diameter at Bevel | Inside Diameter at End | WT t / t1 | Center to End Daimeter (A-B-C-M) | Center to Center Daimeter (O) | Back-Face Daimeter (K) | Align-ment of Ends (U) |
| 1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
| 3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
| 4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
| 5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
| 8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
| 10 | +4 -3 | 3,2 | WT | 2 | 7 | 7 | 2 |
| 12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
| 20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
| 26 a 30 | +7 -5 | 4,8 | 3 | - | - | - | - |
| 32 a 48 | +7 -5 | 4,8 | 5 | - | - | - | - |
SABIC-Approved stainless fittings manufacturers offer maximum schedule and large size welded and seamless fittings in Dubai, call us for our factory price, check SS buttweld fittings wall thickness
Stainless Steel Buttweld Pipe Fittings Wall Thickness
| NPS | Number Of SCH | O.D. In inches MM | WT In inches mm | Mass lb/ft kg/m |
|---|---|---|---|---|
| 1/8 6 | 5S | 0.405 10.3 | ... | ... |
| 1/8 6 | 10S | 0.405 10.3 | 0.049 1.24 | 0.19 0.28 |
| 1/8 6 | 40S | 0.405 10.3 | 0.068 1.73 | 0.24 0.37 |
| 1/8 6 | 80S | 0.405 10.3 | 0.095 2.41 | 0.31 0.47 |
| 1/4 8 | 5S | 0.540 13.7 | ... | ... |
| 1/4 8 | 10S | 0.540 13.7 | 0.065 1.65 | 0.33 0.49 |
| 1/4 8 | 40S | 0.540 13.7 | 0.088 2.24 | 0.43 0.63 |
| 1/4 8 | 80S | 0.540 13.7 | 0.119 3.02 | 0.54 0.80 |
| 3/8 10 | 5S | 0.675 17.1 | ... | ... |
| 3/8 10 | 10S | 0.675 17.1 | 0.065 1.65 | 0.42 0.63 |
| 3/8 10 | 40S | 0.675 17.1 | 0.091 2.31 | 0.57 0.84 |
| 3/8 10 | 80S | 0.675 17.1 | 0.126 3.20 | 0.74 1.10 |
| 1/2 15 | 5S | 0.840 21.3 | 0.065 1.65 | 0.54 0.80 |
| 1/2 15 | 10S | 0.840 21.3 | 0.083 2.11 | 0.67 1.00 |
| 1/2 15 | 40S | 0.840 21.3 | 0.109 2.77 | 0.85 1.27 |
| 1/2 15 | 80S | 0.840 21.3 | 0.147 3.73 | 1.09 1.62 |
| 3/4 20 | 5S | 1.050 26.7 | 0.065 1.65 | 0.68 1.02 |
| 3/4 20 | 10S | 1.050 26.7 | 0.083 2.11 | 0.86 1.28 |
| 3/4 20 | 40S | 1.050 26.7 | 0.113 2.87 | 1.13 1.69 |
| 3/4 20 | 80S | 1.050 26.7 | 0.154 3.91 | 1.48 2.20 |
| 1 25 | 5S | 1.315 33.4 | 0.065 1.65 | 0.68 1.02 |
| 1 25 | 10S | 1.315 33.4 | 0.083 2.11 | 0.86 1.28 |
| 1 25 | 40S | 1.315 33.4 | 0.133 3.38 | 1.68 2.50 |
| 1 25 | 80S | 1.315 33.4 | 0.179 4.55 | 2.17 3.24 |
| 1-1/4 32 | 5S | 1.660 42.2 | 0.065 1.65 | 1.11 1.65 |
| 1-1/4 32 | 10S | 1.660 42.2 | 0.109 2.77 | 1.81 2.69 |
| 1-1/4 32 | 40S | 1.660 42.2 | 0.140 3.56 | 2.27 3.39 |
| 1-1/4 32 | 80S | 1.660 42.2 | 0.191 4.85 | 3.00 4.47 |
| 1-1/2 40 | 5S | 1.900 48.3 | 0.065 1.65 | 1.28 1.90 |
| 1-1/2 40 | 10S | 1.900 48.3 | 0.109 2.77 | 2.09 3.11 |
| 1-1/2 40 | 40S | 1.900 48.3 | 0.145 3.68 | 2.72 4.05 |
| 1-1/2 40 | 80S | 1.900 48.3 | 0.200 5.08 | 3.63 5.41 |
| 2 50 | 5S | 2.375 60.3 | 0.065 1.65 | 1.61 2.39 |
| 2 50 | 10S | 2.375 60.3 | 0.109 2.77 | 2.64 3.93 |
| 2 50 | 40S | 2.375 60.3 | 0.154 3.91 | 3.66 5.44 |
| 2 50 | 80S | 2.375 60.3 | 0.218 5.54 | 5.03 7.48 |
| 2-1/2 65 | 5S | 2.875 73 | 0.083 2.11 | 2.48 3.69 |
| 2-1/2 65 | 10S | 2.875 73 | 0.120 3.05 | 3.53 5.26 |
| 2-1/2 65 | 40S | 2.875 73 | 0.203 5.16 | 5.80 8.63 |
| 2-1/2 65 | 80S | 2.875 73 | 0.276 7.01 | 7.67 11.41 |
| 3 80 | 5S | 3.500 88.9 | 0.083 2.11 | 3.03 4.52 |
| 3 80 | 10S | 3.500 88.9 | 0.120 3.05 | 4.34 6.46 |
| 3 80 | 40S | 3.500 88.9 | 0.216 5.49 | 7.58 11.29 |
| 3 80 | 80S | 3.500 88.9 | 0.300 7.62 | 10.26 15.27 |
| 3-1/2 90 | 5S | 4.000 101.6 | 0.083 2.11 | 3.48 5.18 |
| 3-1/2 90 | 10S | 4.000 101.6 | 0.120 3.05 | 4.98 7.41 |
| 3-1/2 90 | 40S | 4.000 101.6 | 0.226 5.74 | 9.12 13.57 |
| 3-1/2 90 | 80S | 4.000 101.6 | 0.318 8.08 | 12.52 18.64 |
| 4 100 | 5S | 4.500 114.3 | 0.083 2.11 | 3.92 5.84 |
| 4 100 | 10S | 4.500 114.3 | 0.120 3.05 | 5.62 8.37 |
| 4 100 | 40S | 4.500 114.3 | 0.237 6.02 | 10.80 16.08 |
| 4 100 | 80S | 4.500 114.3 | 0.337 8.56 | 15.00 22.32 |
| 5 125 | 5S | 5.563 141.3 | 0.109 2.77 | 6.36 9.46 |
| 5 125 | 10S | 5.563 141.3 | 0.134 3.40 | 7.78 11.56 |
| 5 125 | 40S | 5.563 141.3 | 0.258 6.55 | 14.63 21.77 |
| 5 125 | 80S | 5.563 141.3 | 0.375 9.53 | 20.80 30.97 |
| 6 150 | 5S | 6.625 168.3 | 0.109 2.77 | 7.59 11.31 |
| 6 150 | 10S | 6.625 168.3 | 0.134 3.40 | 9.30 13.83 |
| 6 150 | 40S | 6.625 168.3 | 0.280 7.11 | 18.99 28.26 |
| 6 150 | 80S | 6.625 168.3 | 0.432 10.97 | 28.60 42.56 |