(1)
Price Difference of Inconel 625 Pipe Fittings In In Europe & India
ASTM B366 UNS N06625 Inconel 625 Pipe Fittings provide a superior level of machinability.And it has better weldability compared to many other substances with a high nickel alloy basis. The Inconel 625 Elbow does not need any preheating and post-weld treatment because it is naturally corrosion resistant. Alloy 625 Pipe Fittings are utilised in chemical processing equipment that works with mixed acids. In India, the cost is lower than in Europe.
How Are Welded Alloy 625 Elbow Made?
When the alloying component niobium is introduced to this alloy 625 fittings alloy, it is transformed. When the mixture is reinforced, the solution gets strong, and the plastic distortion caused by external tension is decreased. Because of the existence of chloride ions, ASTM B366 Inconel 625 Fittings have exceptional resistance to stress-related rust. Additionally, ASTM B366 N06625 Tee is resistant to corrosion in crevices. Alloy 625 Buttweld Elbow may also withstand corrosion from inorganic acids such as sulfuric and phosphoric. This alloy is employed in the production of different fitting parts that are used in conjunction with different plant machinery.
What Industries Are ASTM B366 N06625 Tee Used?
Are you searching for a nonmagnetic nickel alloy connection? The answer is Inconel 625 Fittings. When the alloying element niobium is introduced to this composition 625 fittings alloy, it is so called to be solution reinforced. When the solution is reinforced, the solution becomes robust, and the plastic deformation caused by external tension is decreased. ASME B16.9 Inconel 625 Fittings are superior alloy fittings with higher stiffness and wear resistance, according to ASME B16.9. these are used in pipeline, oil and gas industry.
How Are WPNCMC Fittings Installed?
Apart from being utilised as a pipe top, the Alloy 625 Elbow can be employed as piping headers. When used in combination with a lap joint flange, the stub end is essentially regarded a flange.
Table of content
Inconel 625 Pipe Fittings
Size
SCH
Types
ASME
Advantages Of ASTM B366 Inconel 625 Pipe Fittings
(1)
(2)
(3)
Inconel 625 Pipe Fittings Specification
Specification | Inconel 625 Pipe Fittings |
---|---|
Certificate | ISO |
Payment Type | L/C,T/T,D/P,Paypal |
Types | Buttweld Elbow (45 Deg Elbow/ 90 Deg Elbow/ 180 Deg Elbow/ With Long Radius & Short Radius Elbow) Buttweld Tee ( Reducing Tee, Equal Tee, Unequal Tee, Lateral Tee, Straight Tee, Barred Tee, Split Tee) Buttweld Cap (Square Cap/ Round Cap/ Rectangular Cap/ “U” Shape Cap/ “I” Shape Cap/ Oval End) Buttweld Reducer (Eccentric Reducer And Concentric Reducer) Buttweld Cross (Reducing & Equal Cross) Buttweld Bend ( Long Radius Bend/ 3D Bend/ 5D Bend) |
Size Of Manufacturer | BW (Buttweld) 1½" NB to 80" NB SMLS (Seamless) 4” to 24” Weld (Welded) 2” to 36” |
Fittings Connection Types | Buttweld/ Threaded and Instrumentation/ Hydraulic/ Forged |
Supply Ability | 1000 Ton Per Month |
Use In | Marine & dredging Sanitation Process Instrumentation Oil and Gas Petrochemical/ Refinery/Chemical Power etc. |
Testing | Hydrostatic testing machine Magnetic particle detector Direct-reading Spectrograph UI trasonic flaw detector |
Transportation In | Air & Ocean |
Types Of Schedule | SCH 5S To SCH XXS |
Brand Name | Schulzmann |
Available Packing | Packing In Plywood Box And Plywood Pallet |
Equipment | Pushing Machine Press machine electric bevelling machine |
Available Coating | Oil Black Paint Yellow Transparent Anti-rust Paint Zinc Plated Cold and Hot Dip Galvanized |
Manufacturing Productivity | 1200 ton per month |
Description | Price In US ($) |
---|---|
BUTTWELD, INCONEL 625, 0.5 ELBOW-90 DEGREE, PER ASTM B366 | US $555.23 Per KG |
DI 356X16 INCONEL END CAPS TO FIT 4.5MM X0.123 | US $136.87 Per KG |
ASME B16.9, INCONEL 625, 90 ELBOWS, SMLS, SIZE 18 STD | $ US 2162.14 Per KG |
BUTTWELD, INCONEL 625, 2 x 1.5 REDUCER - ECCENTRIC | US $298.30 Per KG |
SMLS, INCONEL 625, ASTM B366, 90 ELBOWS, SIZE 6 SCH40 | US $ 4177.45 Per KG |
INCONEL 625, SMLS, ASTM B366, 90 ELBOW, SIZE 3/4 SCH40 | US $ 194.42 Per KG |
B16.9, SMLS, 90 ELBOWS, INCONEL 625, SIZE 16 SCH20 | US $ 143.82 Per KG |
INCONEL 625, SCH40, 2X2X1-1/2 NB, Reducing Tee | US $ 946.19 Per KG |
INCONEL 625 PER ASTM B366, 0.5 ELBOW -90 DEGREE, BUTTWELD | US $463.43 Per KG |
B16.9, SMLS, 90 ELBOWS, INCONEL 625, SIZE 12 SCH20 | US $ 1923.98 Per KG |
INCONEL 625, SMLS, 90 ELBOWS, SIZE 16 SCH10 | US $ 195.95 Per KG |
Types Of Inconel 625 Buttweld Fittings
Alloy 625 45 Deg Elbow
UNS N06625 90 Deg Elbow
Inconel 625 180 Deg Elbow
ASTM B366 Inconel 625 Long Radius Elbow
Nickel Alloy 625 Short Radius Elbow
Alloy 625 1D Elbow
DIN 2.4856 3D Elbow
ASME SB 366 UNS N06625 5D Elbow
Nickel 625 10D Elbow
ASTM B366 UNS N06625 Reducing Tee
Inconel 625 Equal Tee
SCH 10 Inconel 625 Lateral Tee
SCH 80 Nickel Alloy 625 Split Tee
Alloy Inconel 625 Concentric Reducer
Inconel UNS N06625 Eccentric Reducer
Alloy 625 Pipe Bend
Nickel Alloy 625 Reducing Cross
625 Inconel Stub End
Inconel 625 Fittings
Alloy Inconel 625 Fittings
Alloy 625 Fittings
Inconel 625 Elbow
WPNCMC Fittings
WPNCMC Buttweld Fittings
WPNCMC Elbow
WPNCMC Tee
WPNCMC Reducer
Types Of ASME SB366 Inconel 625 Forged Fittings
ASTM B366 Inconel 625 45 Deg Forged Elbow
Nickel Alloy 625 90 Deg Threaded Elbows
Inconel 625 Coupling
Alloy 625 Forged Tee
Inconel Alloy 625 Union
UNS N06625 Plug
Nickel Alloy 625 Bushing
Inconel 625 Pipe Nipple
Nickel Alloy 625 Forged Cap
NPS | Outside Diameter Of (D) |
90 Deg LR (A) |
45 Deg LR (B) |
90 Deg 3D (A) |
45 Deg 3D (B) |
1/2 | 21.3 | 38 | 16 | ||
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1.1/4 | 42.2 | 48 | 25 | 95 | 39 |
1.1/2 | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2.1/2 | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3.1/2 | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 946 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
Corrosion Resistance Of Inconel 625 Weld Fittings
Different Ends Finishing Of DIN 2.4856 Stub End
Beveled Ends
Squared Ends
Flanged Ends
Normal Pipe Size | Weight LBS | Weight Kilogram |
1/2 | 0.18 | 0.08 |
3/4 | 0.19 | 0.09 |
1 | 0.4 | 0.18 |
1.1/4 | 0.6 | 0.27 |
1.1/2 | 0.9 | 0.41 |
2 | 1.6 | 0.73 |
2.1/2 | 3.25 | 1.47 |
3 | 5 | 2.27 |
3.1/2 | 6.75 | 3.06 |
4 | 9 | 4.08 |
5 | 15 | 6.8 |
6 | 24.5 | 11.11 |
8 | 50 | 22.68 |
10 | 88 | 39.92 |
12 | 125 | 56.7 |
14 | 160 | 72.57 |
16 | 206 | 93.44 |
18 | 260 | 117.93 |
20 | 320 | 145.15 |
22 | 394 | 178.72 |
24 | 460 | 208.65 |
26 | 550 | 249.48 |
30 | 734 | 332.94 |
36 | 1062 | 481.72 |
Inconel 625 Fittings Equivalent
Country | Body | Grade |
USA | UNS | N06625 |
France | AFNOR | NC 22 D Nb |
GB | BS | NA21 |
Germany | DIN | 2.3856 |
Alloy 625 Buttweld Elbow Chemical Composition
Element | Min | Max |
Carbon | -- | 0.10 |
Nickel | Bal. | |
Chromium | 20.0 | 23.0 |
Iron | -- | 5.00 |
Silicon | -- | 0.50 |
Manganese | -- | 0.50 |
Sulfur | -- | 0.015 |
Phosphorus | -- | 0.015 |
Molybdenum | 8.00 | 10.0 |
Titanium | -- | 0.40 |
Cobalt | -- | 1.00 |
Columbium + Tantalum | 3.15 | 4.15 |
Aluminum | -- | 0.40 |
Inconel 625 High Temp Alloy Fittings Mechanical Properties
Element | Yield Strength (0.2%Offset) | Elongation | Tensile Strength | Density | Melting Point |
Inconel 625 Flanges |
Psi – 75,000 , MPa – 517 | 42.5 % | Psi – 1,35,000 , MPa – 930 | 8.4 g/cm3 | 1350 °C (2460 °F) |
WPNCMC Fittings Physical Properties
PROPERTY | 21°C | 204 °C | 316 °C | 427 °C | 538 °C | 649 °C | 760 °C | 871 °C |
Modulus of Elasticity/ MPa | 2.07 | 1.93 | 1.93 | 1.86 | 1.79 | 1.65 | 1.59 | - |
Elongation % | 44 | 45 | 42.5 | 45 | 48 | 34 | 59 | 117 |
Coefficient of Thermal Expansion µm/m⁰C | - | 13.1 | 13.3 | 13.7 | 14 | 14.8 | 15.3 | 15.8 |
Ultimate Tensile Strength /Mpa | 992.9 | 923.9 | 910.1 | 910.1 | 896.3 | 820.5 | 537.8 | 275.8 |
0.2% Yield Strength /MPa | 579.2 | 455.1 | 434.4 | 420.6 | 420.6 | 413.7 | 406.8 | 268.9 |
Thermal Conductivity /kcal/(hr.m.°C) | 8.5 | 10.7 | 12.2 | 13.5 | 15 | 16.4 | 17.9 | 19.6 |
UNS N06625 Reducing Tee Wall Thickness
Size | No. Of SCH | O.D. In Inches mm | WT inches mm | Mass lb/ft kg/m |
---|---|---|---|---|
1/8 6 | 5S | 0.405 10.3 | ... | ... |
1/8 6 | 10S | 0.405 10.3 | 0.049 1.24 | 0.19 0.28 |
1/8 6 | 40S | 0.405 10.3 | 0.068 1.73 | 0.24 0.37 |
1/8 6 | 80S | 0.405 10.3 | 0.095 2.41 | 0.31 0.47 |
1/4 8 | 5S | 0.540 13.7 | ... | ... |
1/4 8 | 10S | 0.540 13.7 | 0.065 1.65 | 0.33 0.49 |
1/4 8 | 40S | 0.540 13.7 | 0.088 2.24 | 0.43 0.63 |
1/4 8 | 80S | 0.540 13.7 | 0.119 3.02 | 0.54 0.80 |
3/8 10 | 5S | 0.675 17.1 | ... | ... |
3/8 10 | 10S | 0.675 17.1 | 0.065 1.65 | 0.42 0.63 |
3/8 10 | 40S | 0.675 17.1 | 0.091 2.31 | 0.57 0.84 |
3/8 10 | 80S | 0.675 17.1 | 0.126 3.20 | 0.74 1.10 |
1/2 15 | 5S | 0.840 21.3 | 0.065 1.65 | 0.54 0.80 |
1/2 15 | 10S | 0.840 21.3 | 0.083 2.11 | 0.67 1.00 |
1/2 15 | 40S | 0.840 21.3 | 0.109 2.77 | 0.85 1.27 |
1/2 15 | 80S | 0.840 21.3 | 0.147 3.73 | 1.09 1.62 |
3/4 20 | 5S | 1.050 26.7 | 0.065 1.65 | 0.68 1.02 |
3/4 20 | 10S | 1.050 26.7 | 0.083 2.11 | 0.86 1.28 |
3/4 20 | 40S | 1.050 26.7 | 0.113 2.87 | 1.13 1.69 |
3/4 20 | 80S | 1.050 26.7 | 0.154 3.91 | 1.48 2.20 |
1 25 | 5S | 1.315 33.4 | 0.065 1.65 | 0.68 1.02 |
1 25 | 10S | 1.315 33.4 | 0.083 2.11 | 0.86 1.28 |
1 25 | 40S | 1.315 33.4 | 0.133 3.38 | 1.68 2.50 |
1 25 | 80S | 1.315 33.4 | 0.179 4.55 | 2.17 3.24 |
1-1/4 32 | 5S | 1.660 42.2 | 0.065 1.65 | 1.11 1.65 |
1-1/4 32 | 10S | 1.660 42.2 | 0.109 2.77 | 1.81 2.69 |
1-1/4 32 | 40S | 1.660 42.2 | 0.140 3.56 | 2.27 3.39 |
1-1/4 32 | 80S | 1.660 42.2 | 0.191 4.85 | 3.00 4.47 |
1-1/2 40 | 5S | 1.900 48.3 | 0.065 1.65 | 1.28 1.90 |
1-1/2 40 | 10S | 1.900 48.3 | 0.109 2.77 | 2.09 3.11 |
1-1/2 40 | 40S | 1.900 48.3 | 0.145 3.68 | 2.72 4.05 |
1-1/2 40 | 80S | 1.900 48.3 | 0.200 5.08 | 3.63 5.41 |
2 50 | 5S | 2.375 60.3 | 0.065 1.65 | 1.61 2.39 |
2 50 | 10S | 2.375 60.3 | 0.109 2.77 | 2.64 3.93 |
2 50 | 40S | 2.375 60.3 | 0.154 3.91 | 3.66 5.44 |
2 50 | 80S | 2.375 60.3 | 0.218 5.54 | 5.03 7.48 |
2-1/2 65 | 5S | 2.875 73 | 0.083 2.11 | 2.48 3.69 |
2-1/2 65 | 10S | 2.875 73 | 0.120 3.05 | 3.53 5.26 |
2-1/2 65 | 40S | 2.875 73 | 0.203 5.16 | 5.80 8.63 |
2-1/2 65 | 80S | 2.875 73 | 0.276 7.01 | 7.67 11.41 |
3 80 | 5S | 3.500 88.9 | 0.083 2.11 | 3.03 4.52 |
3 80 | 10S | 3.500 88.9 | 0.120 3.05 | 4.34 6.46 |
3 80 | 40S | 3.500 88.9 | 0.216 5.49 | 7.58 11.29 |
3 80 | 80S | 3.500 88.9 | 0.300 7.62 | 10.26 15.27 |
3-1/2 90 | 5S | 4.000 101.6 | 0.083 2.11 | 3.48 5.18 |
3-1/2 90 | 10S | 4.000 101.6 | 0.120 3.05 | 4.98 7.41 |
3-1/2 90 | 40S | 4.000 101.6 | 0.226 5.74 | 9.12 13.57 |
3-1/2 90 | 80S | 4.000 101.6 | 0.318 8.08 | 12.52 18.64 |
4 100 | 5S | 4.500 114.3 | 0.083 2.11 | 3.92 5.84 |
4 100 | 10S | 4.500 114.3 | 0.120 3.05 | 5.62 8.37 |
4 100 | 40S | 4.500 114.3 | 0.237 6.02 | 10.80 16.08 |
4 100 | 80S | 4.500 114.3 | 0.337 8.56 | 15.00 22.32 |
5 125 | 5S | 5.563 141.3 | 0.109 2.77 | 6.36 9.46 |
5 125 | 10S | 5.563 141.3 | 0.134 3.40 | 7.78 11.56 |
5 125 | 40S | 5.563 141.3 | 0.258 6.55 | 14.63 21.77 |
5 125 | 80S | 5.563 141.3 | 0.375 9.53 | 20.80 30.97 |
6 150 | 5S | 6.625 168.3 | 0.109 2.77 | 7.59 11.31 |
6 150 | 10S | 6.625 168.3 | 0.134 3.40 | 9.30 13.83 |
6 150 | 40S | 6.625 168.3 | 0.280 7.11 | 18.99 28.26 |
6 150 | 80S | 6.625 168.3 | 0.432 10.97 | 28.60 42.56 |
Nickel Alloy 625 Reducer Tolerance
NPS | Outer Diameter at Bevel | Inner Diameter at End | Wall Thickness Of t / t1 |
Overall Length Of H |
1/2 a 2 1/2 | 1 | 0,8 | Not | 2 |
3 a 3 1/2 | 1 | 1,6 | less | 2 |
4 | +2 -1 | 1,6 | than | 2 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 2 |
8 | 2 | 1,6 | of nominal | 2 |
10 | +4 -3 | 3,2 | tickness | 2 |
12 a 18 | +4 -3 | 3,2 | 3 | |
20 a 24 | +6 -5 | 4,8 | 3 | |
26 a 30 | +7 -5 | 4,8 | 3 | |
32 a 48 | +7 -5 | 4,8 | 5 |
O.D. | size Or High Of End Cap | W.T. Of ('E') | ||
(DN) | (NPS) | (E) | (E1) | (E) |
15 | 1/2 | 25 | 25 | 3.73 |
20 | 3/4 | 25 | 25 | 3.91 |
25 | 1 | 38 | 38 | 4.55 |
32 | 11/4 | 38 | 38 | 4.85 |
40 | 11/2 | 38 | 38 | 5.08 |
50 | 2 | 38 | 44 | 5.54 |
65 | 21/2 | 38 | 51 | 7.01 |
80 | 3 | 51 | 64 | 7.62 |
90 | 31/2 | 64 | 76 | 8.08 |
100 | 4 | 64 | 76 | 8.56 |
125 | 5 | 76 | 89 | 9.53 |
150 | 6 | 89 | 102 | 10.97 |
200 | 8 | 102 | 127 | 12.7 |
250 | 10 | 127 | 152 | 12.7 |
300 | 12 | 152 | 178 | 12.7 |
350 | 14 | 165 | 191 | 12.7 |
400 | 16 | 178 | 203 | 12.7 |
450 | 18 | 203 | 229 | 12.7 |
500 | 20 | 229 | 254 | 12.7 |
550 | 22 | 254 | 254 | 12.7 |
600 | 24 | 267 | 305 | 12.7 |
650 | 26 | 267 | ||
700 | 28 | 267 | ||
750 | 30 | 267 | ||
800 | 32 | 267 | ||
850 | 34 | 267 | ||
900 | 36 | 267 | ||
950 | 38 | 305 | ||
1000 | 40 | 305 | ||
1050 | 42 | 305 | ||
1100 | 44 | 343 | ||
1150 | 46 | 343 | ||
1200 | 48 | 343 |