Weight & Thread
Thread : UN / UNF-2b
How Are Sae Flanges Attached To Pipe?
By heating the metal parts and introducing a filler metal, welding unites materials. The most efficient technique of flange connection is often welding for robust, high pressure interconnections of similar substances. By heating a filler metal, which then solidifies to serve as the connector, soldering is used to link materials. Tighter specifications and clean joints are possible thanks to this technique because it doesn't heat the workpieces or cause thermal distortion. To enable the couplings to be screwed securely similarly to nuts and bolts, threading is given to a sae flange.
What Kind Of O-rings Are Suitable For Hydraulic Flanges?
Typically, flare O-rings are manufactured of Buna-N or Viton. They are utilised to create one of the strongest seals possible in Hydraulic Flanges. When utilised correctly, the elastomeric seal offers a leak-proof substitute for SAE 37° flared tube fittings, effectively removing hydraulic leakage. Attached seal O-rings are commonly employed as bolt sealing in hydraulic equipment. But they are also suitable for a wide range of other uses. The bonded seal is made up of a metal exterior ring or a rubber elastomer inner ring.It serves as a gasket to produce the sealing action. The basic idea of bonded seals can be employed to create bespoke shapes for specialised applications.
SAE Split Flange Installation
The benefit of this form of SAE Split Flange is that it is simple to install on current piping and hydraulic tube.
SAE split flanges are created to allow for convenient pipe and tube assembly in tight quarters situations while also providing tilt proof clamping.
Square Flanges Are Used In Hydraulic Systems
In hydraulic devices, square flanges are employed to link a pipe to a part or a pipe to a pipe junction. Square flanges are square in shape. Square flanges are manufactured in compliance with various specifications depending on different nations in order to accomplish their purpose.
With Square Flanges, you may ensure that liquids flow smoothly through stainless steel pipes or even other hydraulic devices. Square flanges are available in sizes ranging from 1/4 inch to 6 inch. The most frequent system installation size varies from 1/2 to 2 inches.
Table of content
Hydraulic Flanges
Size
Screws
Material
ASME
Technical Specifications
Weight & Thread
Pressure
Connection
High Pressure Hydraulic Flanges Specification
Specifications | Hydraulic Flanges |
---|---|
Torque | Grade 8 UNC: 24 lb-ft |
Fitting Type | O-ring |
Hydraulic Flanges Manufacturers In UAE | Code 61 & Code 62 |
Maximum Operating Pressure | 6000 PSI |
Maximum Operating Pressure Metric | 40 MPa |
Supporting Material For Flanges | Gasket/ Ring Joint/ Flanges Bolts |
Sae Flange Manufacturer In UAE | 300 ton per month (Manufacturing Productivity) |
Available Packing | Packing In Plywood Box And Plywood Pallet |
Brand Name | Schulzmann |
Testing | Hydrostatic testing machine Magnetic particle detector Direct-reading Spectrograph UI trasonic flaw detector |
Certificate | ISO |
Methods Of Forging | Casting Forging Rolling Cutting |
Use In | Marine & dredging Sanitation Process Instrumentation Oil and Gas Petrochemical/ Refinery/Chemical Power etc. |
Equipment | Pushing Machine Press machine electric bevelling machine |
Schedule | SCH 5S To XXS |
Payment Type | L/C,T/T,D/P,Paypal |
Transportation In | Air & Ocean and Land |
Supply Ability | 200 Ton Per Month |
Description | Price In US ($) |
---|---|
FLANGE CLAMP, SAE HYDRAULIC; CODE 61; SPLIT FLAT | US $32.34 Per KG |
FLANGE CLAMP, SAE HYDRAULIC; CODE 61; SPLIT O-RING | US $78.52 Per KG |
CODE 62 FLANGE 3/4 3/4 (M23611-12-12), ISO /SAE( HYDRAULICS HOSE FITTING) | US $146.59 Per KG |
90 ISO /SAE CODE 62 FLANGE 11 (M43690-16-16) ( HYDRAULICS HOSE FITTING) | US $244.61 Per KG |
ISO /SAE CODE 62 FLANGE 11 (M43610-16-16)( HYDRAULICS HOSE FITTING) | US $135.96 Per KG |
CODE 62 FLANGE 3/4 3/4, ISO /SAE (M3640-12-12)( HYDRAULICS HOSE FITTING) | US $254.22 Per KG |
FLANGE CLAMP, SAE HYDRAULIC; CODE 61; OILWELL SUPPLIES: 56541-08-S SPLIT O-RING | US $114.07 Per KG |
SAE HYDRAULIC; CODE 61; SPLIT FLAT, OILWELL SUPPLIES: 56541-16-S FLANGE CLAMP | US $46.98 Per KG |
SAE HYDRAULIC; CODE 61; SPLIT O-RING, OILWELL EQUIPMENT SPARES: 56541-08-S FLANGE CLAMP | US $80.05 Per KG |
M43310-12-12 (HYDRAULICS HOSE FITTINGS)M ISO SAE CODE 61 FLANGE 3/4 3/4 | US $129.50 Per KG |
ISO SAE CODE 62 FLANGE 3/4 3/4 M43610-12-12 (HYDRAULICS HOSE FITTINGS) | US $165.33 Per KG |
Types Of Hydraulic Sae Flanges
Square Hydraulic Flanges
High Pressure Hydraulic Flanges
Sae Flanges
Hydraulic Sae Flanges
Hydraulic Split Flanges
Hydraulic Flanges
Hydraulic Pump Flanges
Sae J518 Flanges
Sae J518 Split Flanges
Sae J518 4-bolt Flanges
Iso 6162 Flanges
Sae 3000 Flanges
Sae 6000 Flanges
Sae 3000 Psi Flanges
Iso 6162 Split Flanges
Sae Female Threads Flanges
Hydraulic Weld Flanges
Hydraulic Square Flanges
Hydraulic Tank Flanges
Anchor Hydraulic Flanges
Square Hydraulic Flanges
NPS | DASH SIZE | BØ | T | F | G | BOLT LENGTH And PORT THREAD | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PORT | LENGHT OF BOLT | PORT | BOLT | ||||||||||
Inches | Millimeter | Inches | Millimeter | Inches | Millimeter | Inches | Millimeter | Inches | UNC | Inches | METRIC | Millimeter | |
1/2 | -08 | 30,2 | 1.19 | 6,73 | 0.265 | 17,5 | 0.69 | 38,1 | 1.50 | 5/16 – 18 | 1.1/4 | M8 x 1,25 | 35 |
*5/8 | -10 | 34,0 | 1.34 | 6,73 | 0.265 | 19,8 | 0.78 | 42,9 | 1.69 | 5/16 – 18 | M8 x 1,25 | ||
3/4 | -12 | 38,1 | 1.50 | 6,73 | 0.265 | 22,2 | 0.88 | 47,6 | 1.88 | 3/8 – 16 | 1.1/4 | M10 x 1,5 | 35 |
1 | -16 | 44,5 | 1.75 | 8,00 | 0.315 | 26,2 | 1.03 | 52,4 | 2.06 | 3/8 – 16 | 1.1/4 | M10 x 1,5 | 35 |
1.1/4 | -20 | 50,8 | 2.00 | 8,00 | 0.315 | 30,2 | 1.19 | 58,7 | 2.31 | 7/16 – 14 | 1.1/2 | M10 x 1,5 | 40 |
1.1/2 | -24 | 60,3 | 2.38 | 8,00 | 0.315 | 35,7 | 1.41 | 69,8 | 2.75 | 1/2 – 13 | 1.1/2 | M12 x 1,75 | 45 |
1.1/2 | -24 | 60,3 | 2.38 | 8,00 | 0.315 | 35,7 | 1.41 | 69,8 | 2.75 | 1/2 – 13 | 1.1/2 | M12 x 1,75 | 45 |
2 | -32 | 71,4 | 2.81 | 9,53 | 0.375 | 42,9 | 1.69 | 77,8 | 3.06 | 1/2 – 13 | 1.1/2 | M12 x 1,75 | 45 |
2.1/2 | -40 | 84,1 | 3.31 | 9,53 | 0.375 | 50,8 | 2.00 | 88,9 | 3.50 | 1/2 – 13 | 1.3/4 | M12 x 1,75 | 45 |
3 | -48 | 101,6 | 4.00 | 9,53 | 0.375 | 61,9 | 2.44 | 106,4 | 4.19 | 5/8 – 11 | 1.3/4 | M16 x 2,0 | 45 |
1/2 | -08 | 31,7 | 1.25 | 7,75 | 0.305 | 18,2 | 0.72 | 40,5 | 1.59 | 5/16 – 18 | 1.1/4 | M8 x 1,25 | 35 |
3/4 | -12 | 41,3 | 1.63 | 8,76 | 0.345 | 23,8 | 0.94 | 50,8 | 2.00 | 3/8 – 16 | 1.1/2 | M10 x 1,5 | 40 |
1 | -16 | 47,6 | 1.88 | 9,53 | 0.375 | 27,8 | 1.09 | 57,2 | 2.25 | 7/16 – 14 | 1.3/4 | M12 x 1,75 | 45 |
1.1/4 | -20 | 54,0 | 2.12 | 10,29 | 0.405 | 31,8 | 1.25 | 66,7 | 2.63 | 1/2 – 13 | 1.3/4 | M14 x 2,0 | 45 |
1.1/2 | -24 | 63,5 | 2.50 | 12,57 | 0.495 | 36,5 | 1.44 | 79,4 | 3.13 | 5/8 – 11 | 2.1/4 | M16 x 2,0 | 60 |
2 | -32 | 79,4 | 3.13 | 12,57 | 0.495 | 44,5 | 1.75 | 96,8 | 3.81 | 3/4 – 10 | 2.3/4 | M20 x 2,5 | 70 |
WELD IN DOUBLE FLANGES
SERIES 3000
(Bar) | Size | Type | A | B | C | D | E | F | G | H | I | Screws |
345 | 1/2" | DFS080S | 21.6 | 13 | 38.10 | 54 | 17.48 | 46 | 72 | 32 | 19 | M8 x 30 |
345 | 1/2" | DFS080S038 | 17.5 | 13 | 38.10 | 54 | 17.48 | 46 | 72 | 32 | 19 | M8 x 30 |
345 | 3/4" | DFS100S | 27.2 | 19 | 47.63 | 65 | 22.23 | 50 | 72 | 36 | 19 | M10 x 35 |
345 | 1" | DFS102S | 34.0 | 25 | 52.37 | 70 | 26.19 | 55 | 76 | 36 | 19 | M10 x 35 |
276 | 1 1/4" | DFS104S | 42.8 | 32 | 58.72 | 79 | 30.18 | 68 | 82 | 42 | 22 | M10 x 40 |
207 | 1 1/2" | DFS106S | 48.6 | 38 | 69.85 | 93 | 35.71 | 78 | 90 | 50 | 24 | M12 x 45 |
207 | 2" | DFS108S | 61.0 | 51 | 77.77 | 102 | 42.88 | 90 | 90 | 50 | 26 | M12 x 45 |
172 | 2 1/2" | DFS110S | 76.6 | 63 | 88.90 | 114 | 50.80 | 105 | 100 | 50 | 30 | M12 x 45 |
138 | 3" | DFS112S | 90.5 | 73 | 106.38 | 134 | 61.93 | 124 | 100 | 54 | 34 | M16 x 50 |
34 | 3 1/2" | DFS114S | 103.0 | 89 | 120.65 | 152 | 69.85 | 136 | 96 | 54 | 34 | M16 x 50 |
34 | 4" | DFS116S | 115.5 | 97 | 130.18 | 162 | 77.77 | 146 | 96 | 54 | 34 | M16 x 50 |
34 | 5" | DFS118S | 141.3 | 120 | 152.40 | 184 | 92.08 | 180 | 100 | 56 | 28 | M16 x 50 |
SERIES 6000
(Bar) | Size | Type | A | B | C | D | E | F | G | H | I | Screws |
414 | 1/2" | DFS401S012 | 21.6 | 13 | 40.49 | 57 | 18.24 | 46 | 72 | 32 | 19 | M8 x 30 |
414 | 1/2" | DFS401S038 | 17.5 | 13 | 40.49 | 57 | 18.24 | 46 | 72 | 32 | 19 | M8 x 30 |
414 | 3/4" | DFS402S | 27.2 | 19 | 50.80 | 71 | 23.80 | 55 | 70 | 42 | 22 | M10 x 40 |
414 | 1" | DFS403S | 34.0 | 25 | 57.15 | 81 | 27.76 | 65 | 82 | 42 | 22 | M12 x 45 |
414 | 1 1/4" | DFS404S | 42.8 | 32 | 66.68 | 95 | 31.75 | 78 | 88 | 50 | 25 | M14 x 45 |
414 | 1 1/2" | DFS405S | 48.6 | 38 | 79.38 | 112 | 36.50 | 94 | 100 | 60 | 28 | M16 x 50 |
414 | 2" | DFS406S | 61.0 | 51 | 96.82 | 134 | 44.45 | 114 | 130 | 74 | 24 | M20 x 70 |
414 | 2 1/2" | DFS507S | 76.6 | 63 | 123.80 | 180 | 58.70 | 152 | 160 | 90 | 30 | M24 x 80 |
414 | 3" | DFS508S | 90.5 | 73 | 152.40 | 208 | 71.40 | 178 | 180 | 110 | 30 | M30 x 100 |
PN (bar) | Type | Dimensions | ||||||||||||
Bolts 8.8 | Bolts 10.9 | (in) | Order Cod | A | B | C | D | E | F | G | H | I | L | BOLTS |
350 | 350 | 1/2" | PN-SPLIT-3-1/2" | 30.96 | 24.26 | 38.1 | 54 | 8.74 | 22.8 | 19 | 13 | 6.22 | 8.5 | M 8X25 |
350 | 350 | 3/4" | PN-SPLIT-3-3/4" | 38.89 | 32.13 | 47.63 | 65 | 11.13 | 25.9 | 22 | 14 | 6.22 | 10.5 | M 10X30 |
250 | 315 | 1" | PN-SPLIT-3-1" | 45.24 | 38.48 | 52.37 | 70 | 13.08 | 29.2 | 24 | 16 | 7.49 | 10.5 | M 10X30 |
200 | 250 | 1"1/4 | PN-SPLIT-3-1" 1/4 | 51.59 | 43.69 | 58.72 | 79 | 15.09 | 36.3 | 22 | 16 | 7.49 | 12 | M 10X30 |
200 | 200 | 1"1/2 | PN-SPLIT-3-1" 1/2 | 61.09 | 50.8 | 69.85 | 94 | 17.86 | 41.1 | 25 | 16 | 7.49 | 13.5 | M 12X25 |
160 | 200 | 2" | PN-SPLIT-3- 2" | 72.24 | 62.74 | 77.77 | 102 | 21.44 | 48.2 | 26 | 16 | 9.02 | 13.5 | M 12X25 |
100 | 160 | 2" 1/2 | PN-SPLIT-3-2" 1/2 | 84.94 | 74.93 | 88.9 | 114 | 25.4 | 54.1 | 38 | 19 | 9.02 | 13.5 | M 12X40 |
100 | 160 | 3" | PN-SPLIT-3-3" | 102.39 | 90.93 | 106.38 | 135 | 30.96 | 65.3 | 41 | 22 | 9.02 | 16.8 | M 16X50 |
35 | 35 | 4" | PN-SPLIT-3-4" | 127.79 | 115.06 | 130.18 | 162 | 38.88 | 76 | 35 | 25 | 10.72 | 17 | M 16X50 |
4-Bolt Hydraulic Flange Dimensions
SIZE CODE | MAXIMUM PRESS | A DIAMETER MAXIMUM | B ±.01 |
C ±.01 |
D ±.01 |
E ±.01 |
F UNC-2B | G MIN | H ±.01 |
J ±.03 |
K RAD | L RAD | M MINIMUM | DD MINIMUM | CC MINIMUM | BB MINIMUM |
08 | 5000 | .50 | .344 | .688 | .750 | 1.500 | 5/16-18 | .94 | 1.81 | 2.12 | .91 | .31 | 1.31 | 1.91 | 2.06 | 2.22 |
12 | 5000 | .75 | .438 | .875 | .938 | 1.875 | 3/8-16 | .88 | 2.06 | 2.56 | 1.03 | .34 | 1.62 | 2.16 | 2.41 | 2.66 |
16 | 5000 | 1.00 | .515 | 1.031 | 1.031 | 2.062 | 3/8-16 | .88 | 2.31 | 2.75 | 1.16 | .34 | 1.88 | 2.41 | 2.62 | 2.84 |
20 | 4000 | 1.25 | .594 | 1.188 | 1.156 | 2.312 | 7/16-14 | 1.12 | 2.88 | 3.12 | 1.44 | .41 | 2.12 | 2.97 | 3.09 | 3.22 |
24 | 3000 | 1.50 | .703 | 1.406 | 1.375 | 2.750 | 1/2-13 | 1.06 | 3.25 | 3.69 | 1.62 | .47 | 2.50 | 3.34 | 3.56 | 3.78 |
32 | 3000 | 2.00 | .844 | 1.688 | 1.531 | 3.062 | 1/2-13 | 1.06 | 3.81 | 4.00 | 1.91 | .47 | 3.00 | 3.91 | 4.00 | 4.09 |
40 | 2500 | 2.50 | 1.000 | 2.000 | 1.750 | 3.500 | 1/2-13 | 1.19 | 4.28 | 4.50 | 2.14 | .50 | 3.50 | 4.38 | 4.50 | 4.59 |
48 | 2000 | 3.00 | 1.219 | 2.438 | 2.094 | 4.188 | 5/8-11 | 1.19 | 5.16 | 5.31 | 2.58 | .56 | 4.19 | 5.25 | 5.34 | 5.41 |
56 | 500 | 3.50 | 1.375 | 2.750 | 2.375 | 4.750 | 5/8-11 | 1.31 | 5.50 | 6.00 | 2.75 | .62 | 4.69 | 5.59 | 5.84 | 6.09 |
64 | 500 | 4.00 | 1.531 | 3.062 | 2.562 | 5.125 | 5/8-11 | 1.19 | 6.00 | 6.38 | 3.00 | .62 | 5.19 | 6.09 | 6.28 | 6.47 |
80 | 500 | 5.00 | 1.812 | 3.625 | 3.000 | 6.000 | 5/8-11 | 1.31 | 7.12 | 7.25 | 3.56 | .62 | 6.19 | 7.22 | 7.28 | 7.34 |
Difference Between Code 61 And 62 Flanges
Description | Code 61 Flange | Code 62 Flange |
Series | 3000 | 6000 |
Size | 3/8” to 5” | 3/8” to 3” |
Working Pressure (bar) | 34 to 345 | 414 |
SIZE | ORING | DIMENSIONS | ||||||||||
A | B | C | D | E | F | G | H | I | LENGTH OF BOLT(MIN.) | WEIGHT | ||
8 | G25 | 63 | 40 | 8 | 30 | 14.3 | 24 | 11 | 22 | 11 | M10 x 55 | 1.30 KGS |
10 | G25 | 63 | 40 | 11.5 | 30 | 17.8 | 28 | 11 | 22 | 11 | M10 x 55 | 1.30 KGS |
15 | G25 | 63 | 40 | 16 | 30 | 22.2 | 32 | 11 | 22 | 11 | M10 x 55 | 1.40 KGS |
20 | G30 | 68 | 45 | 20 | 35 | 27.7 | 38 | 12 | 22 | 11 | M10 x 55 | 1.50 KGS |
25 | G35 | 80 | 53 | 25 | 40 | 34.5 | 45 | 14 | 28 | 13 | M12 x 70 | 2.60 KGS |
32 | G40 | 90 | 63 | 31.5 | 45 | 43.2 | 56 | 16 | 28 | 13 | M12 x 70 | 3.15 KGS |
40 | G50 | 100 | 70 | 37.5 | 55 | 49.1 | 63 | 18 | 36 | 18 | M16 x 90 | 5.10 KGS |
50 | G60 | 112 | 80 | 47.5 | 65 | 61.1 | 75 | 20 | 36 | 18 | M16 x 90 | 5.90 KGS |
65 | G75 | 140 | 100 | 60 | 80 | 77.1 | 95 | 22 | 45 | 22 | M20 x 110 | 11.40 KGS |
80 | G85 | 155 | 112 | 71 | 90 | 90 | 108 | 25 | 45 | 24 | M22 x 120 | 14.10 KGS |
100 | G105 | 190 | 140 | 87.3 | 110 | 115.4 | 135 | 28 | 60 | 27 | M24 x 140 | 25.50 KGS |
125 | G130 | 230 | 168 | 120.8 | 135 | 141.2 | 164 | 30 | 65 | 32 | M30 x 170 | 41.00 KGS |
150 | G155 | 270 | 195 | 128.8 | 165 | 166.9 | 193 | 35 | 80 | 39 | M36 x 190 | 68.50 KGS |
Hydraulic Flanges And Components
Different Connections of SAE Flanges
Connections