DIN 2615 Tee

DIN 2615-1 Type A Reducing Tee manufacturer in UAE


DIN 2615 Tee

What Is The Difference Between DIN 2615 Type A And B Seamless Tee?

Type A buttweld fittings have a restricted utilisation factor, whereas Type B buttweld fittings can be used to full capacity. Type A fittings, on the other hand, have a low use rate. DIN 2615 Tee is the outcome of national, European, and/or multinational research and development. A request for a new norm can be submitted by anyone. Standards are produced with full agreement, that is, by professionals with the goal of reaching a shared position. It is done by taking the current state of the art into account.
DIN Standards are evaluated every five years at the very least. If a guideline no longer represents the most recent technological advances, it is either changed or removed.
This standard provides DIN 2615 Type A and B Seamless Tee for butt welding to pipelines. Although the stipulated wall thicknesses match to the tubes, these fittings do not allow functioning at the same internal stress.

Piping DIN 2615 Tee Branch Formula

Equal Tee Branch Formula
Outside Daimeter × 2 ÷ 5
The Schedule 80 Straight Tee has a thick wall, making it safer and more lasting. They are not affected by increasing pressure, mechanical stresses, or chemical reactions.
Seamless Barred Tee is most commonly found in pigged pipelines. We provide high-quality barred tee made of different materials, with constraints to keep the scrapper from moving down the branch.

supplier of DIN 2615-2 Equal Tee in Dubai. Check DIN 2615 Type B Seamless Tee Price Per KG

DIN 2615 Reducing Tee Manufacturing Process

The tees are commonly referred to as 'Pipe Tees,' as they have the shape of a letter 'T'.And link three separate or the same pipes. Tees have 90-degree angles between their nozzles. They can be utilised for both industrial and commercial purposes. Depending on the requirement, they can be any dimension. Tees' primary raw materials are iron, aluminium, plastic, copper, brass, and so forth. We offer a wide variety of DIN 2615, Din 2615 Reducing Tee in various shapes and sizes.

Common Types Of DIN 2615 ST35 Buttweld Tee, View DIN 2615-1 Tee Dimensions




Specialized in manufacturing

DIN 2615 Tee

DIN2615-1 Butt Welding Tee to internationally approved quality standards for applications.

Size

1/2 inch upto 48 Inch

SCH

10S to 180

ASTM

A403, A234, A860

ASME

B16.9
tee-din-2615-2


Common Types Of DIN 2615 ST35 Weld Tee



DIN 2615-1 Seamless Tees Application
DIN 2615-1 Seamless Tees Application
  • Chemical plant equipment
  • Heat exchangers
  • High pressure applications
  • Gas compression
  • Petroleum industries
  • power generation
DIN 2615 Carbon Steel Reducing Tee Test Certificates
DIN 2615 Carbon Steel Reducing Tees Test Certificates
  • Third Party Inspection Repor
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • EN 10204/3.1B
DIN 2615-1 Type A Tee Packing and Shipping
DIN 2615-1 Type A Tee Packing and Shipping
  • Palletize with Shrink Wrap Plastic
  • Packed in Wooden Box
  • Both ends of each crate will indicate the order number, heat number, dimensions, weight
  • Transport of DIN 2615 Type-A Tee by air or sea freight and Land

DIN 2615 Carbon Steel Tee Specification


Specifications DIN 2615 Tee
Brand Name Schulzmann
Certificate ISO
Supply Ability 280 Ton Per Month
Available Packing Packing In Plywood Box And Plywood Pallet
Types Of Schedule SCH 5S To SCH XXS
Available Coating Oil Black Paint
Yellow Transparent
Anti-rust Paint
Zinc Plated
Cold and Hot Dip Galvanized
Joint Type Seamless / Butt-Weld/ Welded/ Fabricated
Payment Type L/C,T/T,D/P,Paypal
Types Of manufacturer Lateral/ Straight/ Reducing/ Equal/ Split/ Unequal/ Barred Tees
Transportation In Air & Ocean and Land
Manufacturing Productivity 567 ton per month
Use In Marine & dredging
Sanitation
Process Instrumentation
Oil and Gas
Petrochemical/ Refinery/Chemical
Power etc.
Size Of Manufacturer BW (Buttweld) 1½" NB to 80" NB
SMLS (Seamless) 4” to 24”
Weld (Welded) 2” to 36”


DIN 2615 Type A and B Seamless Tee Price


Description Price In US ($)
9 X 88,9 X 2,6 1.4571, TEES DIN 2615 DN80 88, DN80 US $330.24 Per KG
DN80 88, TEES,9 X 88,9 X 2,6 1.4571 DN80 US $55.04 Per KG
3 X 33,7 X 2,0 TEES, 1.4571 US $4.03 Per PCS
TEES, DN100 114 3 X 114 3 X 2 6 1 4571 US $41.31 Per KG
TEES, 3 X 33,7 X 2,0 1.4571 US $4.03 Per PCS
1/2(21,3mm): SIZE. 11/13 CARBON STEESL FITTINGS, TEES US $2.62 Per PCS
DIN 2615 1 (33,7mm):SIZE .11/16 CS Fittings, TEES US $1.48 Per PCS
DIN 2615 2 (60,3mm) CS Fittings, SMLS, TEES, :SIZE.11/21 US $1.07 Per PCS
DIN 2615 3/4 (26,9mm), SMLS, CS Fittings, SMLS, TEES, :SIZE.11/15 US $1.70 Per PCS
SIZE.11/19, CS Fittings, SMLS, TEES, DIN 2615 1 1/2(48,3mm) US $725.41 Per KG
DIN 2615 3/4(26,9mm), CS Fittings, SMLS, TEES, SIZE. 11/14 US $519.47 Per KG
SIZE .11/17, CS Fittings, TEES, DIN 2615 1 1/4 (42,4mm) US $1.34 Per PIC
DIN 2615 1 1/4 (42,4mm), CS Fittings, TEES, SIZE.11/18 US $10.92 Per KG
SIZE.11/20, CS Fittings, TEES, DIN 2615 2 (60,3mm) US $903.48 Per KG


Types Of DIN 2615 Tee


DIN 2615-1 Tee

DIN 2615-1 Tee

DIN 2615-2 Tee

DIN 2615-2 Tee

DIN 2615 Reducing Tee

DIN 2615 Reducing Tees

 DIN 2615 Type A and B Seamless Tee

DIN 2615 Type A and B Seamless Tees

Din 2615 Carbon Steel Equal Tee

Din 2615 Carbon Steel Equal Tees

DIN2615-1 Butt welding Tees

DIN2615-1 Butt welding Tees

DIN 2615 Equal Tee

DIN 2615 Equal Tees

DIN 2615 Unequal Tee

DIN 2615 Unequal Tees

DIN 2615 ST35 Weld Tee

DIN 2615 ST35 Weld Tees


DIN 2615 Tee Dimensions


DIN 2615 Tee Dimensions

WDR WDR
3 4 5 3 4 5
DN1 d1 s1 s1 s1 DN2 d2 s2 s2 s2 a b
15 21.3 2.0 3.2 4.0 15 21.3 2.0 3.2 4.0 25 25
10 17.2 1.8 2.9 - 25 25
20 26.9 2.3 3.2 4.0 20 26.9 2.3 3.2 4.0 29 29
15 21.3 2.0 3.2 4.0 29 29
10 17.2 1.8 2.9 - 29 29
25 33.7 2.6 3.2 4.0 25 33.7 2.6 3.2 4.0 38 38
20 26.9 2.3 3.2 4.0 38 38
15 21.3 2.0 3.2 4.0 38 38
32 42.4 2.6 3.6 4.0 32 42.4 2.6 3.6 4.0 48 48
25 33.7 2.6 3.2 4.0 48 48
20 26.9 2.3 3.2 4.0 48 48
15 21.3 2.0 3.2 4.0 48 48
40 48.3 2.6 4.0 5.0 40 48.3 2.6 4.0 5.0 57 57
32 42.4 2.6 3.6 4.0 57 57
25 33.7 2.6 3.2 4.0 57 57
20 26.9 2.3 3.2 4.0 57 57
50 60.3 2.9 4.5 5.6 50 60.3 2.9 4.5 5.6 64 64
40 48.3 2.6 4.0 5.0 64 60
32 42.4 2.6 3.6 4.0 64 57
25 33.7 2.6 3.2 4.0 64 51
20 26.9 2.3 3.2 4.0 64 44
65 76.1 2.9 5.0 7.1 65 76.1 2.9 5.0 7.1 76 76
50 60.3 2.9 4.5 5.6 76 70
40 48.3 2.6 4.0 5.0 76 67
32 42.4 2.6 3.6 4.0 76 64
25 33.7 2.6 3.2 4.0 76 57
80 88.9 3.2 5.6 8.0 80 88.9 3.2 5.6 8.0 86 86
65 76.1 2.9 5.0 7.1 86 83
50 60.3 2.9 4.5 5.6 86 76
40 48.3 2.6 4.0 5.0 86 73
32 42.4 2.6 3.6 4.0 86 70
100 114.3 3.6 6.3 8.8 100 114.3 3.6 6.3 8.8 105 105
80 88.9 3.2 5.6 8.0 105 98
65 76.1 2.9 5.0 7.1 105 95
50 60.3 2.9 4.5 5.6 105 89
40 48.3 2.6 4.0 5.0 105 86
125 139.7 4.0 6.3 10.0 125 139.7 4.0 6.3 10.0 124 124
100 114.3 3.6 6.3 8.8 124 117
80 88.9 3.2 5.6 8.0 124 111
65 76.1 2.9 5.0 7.1 124 108
50 60.3 2.9 4.5 5.6 124 105
150 168.3 4.5 7.1 11.0 150 168.3 4.5 7.1 11.0 143 143
125 139.7 4.0 6.3 10.0 143 137
100 114.3 3.6 6.3 8.8 143 130
80 88.9 3.2 5.6 8.0 143 124
65 76.1 2.9 5.0 7.1 143 121
200 219.1 6.3 8.0 12.5 200 219.1 6.3 8.0 12.5 178 178
150 168.3 4.5 7.1 11.0 178 168
125 139.7 4.0 6.3 10.0 178 162
100 114.3 3.6 6.3 8.8 178 156
80 88.9 3.2 5.6 8.0 178 152
250 273.0 6.3 8.8 14.2 250 273.0 6.3 8.8 14.2 216 216
200 219.1 6.3 8.0 12.5 216 203
150 168.3 4.5 7.1 11.0 216 194
125 139.7 4.0 6.3 10.0 216 191
100 114.3 3.6 6.3 8.8 216 184
300 323.9 7.1 10.0 16.0 300 323.9 7.1 10.0 16.0 254 254
250 273.0 6.3 8.8 14.2 254 241
200 219.1 6.3 8.0 12.5 254 229
150 168.3 4.5 7.1 11.0 254 219
125 139.7 4.0 6.3 10.0 254 216


Burr free DIN 2615 Carbon Steel Lateral Tee manufacturer in UAE, call Schulzmann for free sample!

Tee DIN 2615 Weight


Equal Tee


Normal Pipe Size Weight In LBS Weight In KG
1/2 0.35 0.16
3/4 0.45 0.2
1 0.75 0.34
1.1/4 1.3 0.59
1.1/2 2 0.91
2 3.5 1.59
2.1/2 6 2.72
3 7 3.18
3.1/2 9 4.08
4 12 5.44
5 21 9.53
6 34 15.42
8 55 24.95
10 85 38.56
12 120 54.43
14 165 74.84
16 195 88.45
18 249 112.94
20 342 155.13
22 414 187.79
24 528 239.5
26 770 349.27
30 1060 480.81
36 1490 675.85


Reducing Tee Weight


Normal Pipe Size Weight In LBS Weight In Kilogram
1/2-3/8 0.25 0.11
1/2-1/4 0.25 0.11
3/4-1/2 0.5 0.23
3/4-3/8 0.5 0.23
1-3/4 0.93 0.42
1-1/2 0.88 0.4
1.1/4-1 1.5 0.68
1.1/4-3/4 1.5 0.68
1.1/4-1/2 1.5 0.68
1.1/2-1.1/4 2.25 1.02
1.1/2-1 2.18 0.99
1.1/2-3/4 2.13 0.97
1.1/2-1/2 2 0.91
2-1.1/2 3.75 1.7
2-1.1/4 3.6 1.63
2-1 3.5 1.59
2-3/4 3.25 1.47
2.1/2-2 6 2.72
2.1/2-1.1/2 5.5 2.49
2.1/2-1.1/4 5.25 2.38
2.1/2-1 5 2.27
3-2.1/2 6.75 3.06
3-2 6.5 2.95
3-1.1/2 6.25 2.83
3-1.1/4 6.15 2.79
3.1/2-3 8.8 3.99
3.1/2-2.1/2 8.5 3.86
3.1/2-2 8.3 3.76
3.1/2-1.1/2 8 3.63
3.1/2-1.1/4 - -
4-3.1/2 11.8 5.35
4-3 11.6 5.26
4-2.1/2 11.3 5.13
4-2 11.15 5.06
4-1.1/2 11.25 5.1
5-4 21 9.53
5-3.1/2 20.5 9.3
5-3 20 9.07
5-2.1/2 19.5 8.85
5-2 19 8.62
6-5 34.5 15.65
6-4 33.5 15.2
6-3.1/2 33 14.97
6-3 32.5 14.74
6-2.1/2 32 14.51
8-6 54 24.49
8-5 53 24.04
8-4 51.7 23.45
8-3.1/2 50.7 23
10-8 84.5 38.33
10-6 83 37.65
10-5 81 36.74
10-4 80 36.29
12-10 119 53.98
12-8 117 53.07
12-6 114 51.71
12-5 110 49.9
14-12 160 72.57
14-10 158 71.67
14-8 155 70.31
14-6 115 52.16
16-14 194 88
16-12 191 86.64
16-10 186 84.37
16-8 180 81.65
16-6 173 78.47
18-16 241 109.32
18-14 236 107.05
18-12 230 104.33
18-10 222 100.7
18-8 211 95.71
20-18 340 154.22
20-16 338 153.31
20-14 336 152.41
20-12 334 151.5
20-10 332 150.59
20-8 330 149.69
22-20 412 186.88
22-18 410 185.97
22-16 408 185.07
22-14 406 184.16
22-12 404 183.25
22-10 402 182.34
24-22 525 238.14
24-20 522 236.78
24-18 519 235.41
24-16 516 234.05
24-14 513 232.69
24-12 510 231.33
24-10 507 229.97
26-24 760 344.73
26-22 755 342.46
26-20 750 340.19
26-18 745 337.93
26-16 740 335.66
26-14 735 333.39
26-12 730 331.12
28-26 - -
28-24 - -
28-22 - -
28-20 - -
30-28 - -
30-26 1045 474
30-24 1035 469.47
30-22 1025 464.93
30-20 1015 460.4
30-18 1005 455.86
30-16 995 451.32


Advantages Of DIN 2615 ST35 Weld Tee, Weight Chart Of DIN2615-1 Butt welding Tee

O.D. Of DIN 2615-1 Tee


tube outside diameter d1 (mm) wall thickness s1 (mm) tube outside diameter d2 (mm) wall thickness s2 (mm) Length tolerance +/- mm weight abt. kg
A abt. millimeter B abt. millimeter
159 4,5 108 3,6 143 128 2,0 8,1
159 4,5 159 4,5 138 138 2,0 8,1
159 4,5 88,9 3,2 143 126 2,0 8,1


Advantages Of DIN 2615 Reducing Tee


Advantages

  • Made under strict security standards
  • Light in weight
  • Easy to install
  • Good impact strength


DIN 2615 Equal Tee Tolerances


NPS 1/2
to
2.1/2
3
to
3.1/2
4 5
to
8
10
to
18
20
to
24
26
to
30
32
to
48
O.D.
at Bevel (D)
+1.6
-0.8
1.6 1.6 +2.4
-1.6
+4
-3.2
+6.4
-4.8
+6.4
-4.8
+6.4
-4.8
I.D. at End 0.8 1.6 1.6 1.6 3.2 4.8 +6.4
-4.8
+6.4
-4.8
Center-End (C / M) 2 2 2 2 2 2 3 5
Wall Thickness (t) Not less than 87.5% of Nominal Wall Thickness