ASTM A694 F65 Flanges

Home
ASTM A694 F65 Flanges

A694 GR F65 Weld Neck Flanges manufacturer In UAE, Check Key Features Of ASME B16.5 High Yield F65 Blind Flange

How Can ASTM A694 F65 Flanges Be Classified Based On The Pipe Attachment?

Slip-on flanges
Both the inner and exterior of these flanges are soldered to the pipe. They are often of the hub-forged variety. Without Hub, they may also be made from plates.
Socket-weld
These Flanges are solely welded to the pipe's outside. They are typically utilised in small bore pipelines where socket welding is required.
Threaded Flanges
These Flanges are screwed onto the Tube's outside diameter. They are utilised in places where welding is prohibited.
The ASTM A694 F65 Flanges pressure categoriesvary from 150 to 2500. The pressure numbers, which range from PN6 to PN64, are also employed to describe the pressure capacity. Scheduling options include sch10 through XXS.

High Yield F65 Blind Flange Processing – Hot Forming

Large flanges with intricate shapes can be forged using the hot forging technique because of its low deformation energy and resilience. If the temperature is between 900°C and 1000°C, we can produce flanges using the hot forging technique to produce high-precision flanges. The working environment for hot forging could be improved, nevertheless. In various temperature ranges, the life span of hot forging dies is shorter than that of other dies.
Hot forged flanges' primary function is to lower the forging pressure needed to deform weak components. The metal's strength against deformation, which will significantly reduce the weight of the forging gear.Forgings of Carbon for Pipe Fittings and Components for High-Pressure Transmission Operation A694 GR F65 Weld Neck Flanges Standard Requirement.

We Provide The Best Quality Of ASTM A694 F65 Material, View Mechanical and Physical Properties Of Class 150 A694 Grade F52 Slip On Flanges

What is A694 GR F65 Weld Neck Flanges, and Why Use It?

The High Yield F65 Blind Flange made to ASTM A694 offer good shock and wear resistance. Due to their strength and cost, Carbon Steel F65 Flanges are frequently used in the pipe network and sectors like oil and natural gas.
The A694 F65 Flange is constructed from high-quality materials that may handle high transmission pressure. Most other flanges of the required grade, including the SA 694 F65 Blind Flange, are accessible in their conventional forms.But they can also be tailored to meet the client's needs.

manufacturer Of Polished EN 1092-1 SA694 F65 Swivel Flange In UAE, Check SA 694 F65 Socket Weld Flanges Price List Ex Dubai

Table of content

Specialized in manufacturing

ASTM A694 F65 Flanges

ASTM A694 F65 Flanges have good dimensional accuracy, long service life, and good durability.

Size

1/2 Inches To 48 Inches

Class

150 To 2500

Schedule

SCH 10S To SCH 80S

ASME

B16.5

Mechanical and Physical Properties

Yield Strength

Yield Strength minimum :
MPa-450
ksi-65

Tensile Strength

Tensile Strength minimum :
MPa-530
KSI-77

Elongation

Elongation minimum : 20
Reduction of Area - 35% min

A694 F65 Flanges Key Features

High tensile strength
Rugged construction
Long-lasting
Good dimensional accuracy
Easily withstanding high temperature
Corrosion resistance

Grade F65 Flanges Product specifications

Dimensions : dimensions of the product are ANSI/ ASTM/ ANSI/ BS/ EN/ API/ DIN/ JIS etc
Size : Product size is available in ½” NB to 48” NB
Class : The class of the product are 150#, 300#, 600#, 1500#, 900#, and 2500#
Face Types : The types in which product are offered is raised face (RF), flate type (FF) and ring type joint (RTJ)

Testing Of A694 F65 Carbon Blind Flanges

Hardness test
Flaring/ Flattening test
Chemical/ Mechanical test
Micro/ Macro test
Pitting resistance test
IGC/PMI test

ASTM A694 F65 Material Specification

Specifications	ASTM A694 F65 Flanges
Methods Of Forging	Casting Forging Rolling Cutting
DIN Standard	PN6/ PN10/ PN16/ PN25/ PN40/ PN64
Equipment	Pushing Machine Press machine electric bevelling machine
Face Type	RF (Raised Face), RTJ (Ring Type Joint)
Manufacturing Productivity	200 ton per month
Supply Ability	100 Ton Per Month
Class	Class 150 to 2500. PN 2.5 to PN 250.
Payment Type	L/C,T/T,D/P,Paypal
JIS Standard	5K/ 10K/ 16K 20K/ 30K/ 40K/ 63K
Size	1/2” to 24” (customized diameters: up to 60”.)
EN Standard	6Bar/ 10Bar/ 16Bar/ 25Bar/ 40Bar
Brand Name	Schulzmann
Certificate	ISO
Transportation In	Air & Ocean and Land
Available Packing	Packing In Plywood Box And Plywood Pallet
Use In	Marine & dredging Sanitation Process Instrumentation Oil and Gas Petrochemical/ Refinery/Chemical Power etc.
Supporting Material For Flanges	Gasket/ Ring Joint/ Flanges Bolts
Testing	Hydrostatic testing machine Magnetic particle detector Direct-reading Spectrograph UI trasonic flaw detector

ASTM A694 F65 Carbon Flanges Price List

Description	Price In US ($)
4 INCH, 300LB, S-10S RF WN FLANGE ASTM A182 F60	US $938.40 Per KG
FLANGES REDUCING, WNRTJ 2X1 INCH, SCHXXS 2500# A694 F65	US $99.57 Per KG
FLANGES REDUCING, WNRTJ 3X1 INCH, SCH 40, 1500# A69 F65	US $124.97 Per KG
FLANGES WNRTJ 4.1/16 INCH, API 6BX, 10000#, SCH20 A694 F65	US $748.84 Per KG
FLANGES REDUCING, WNRTJ 2X1 INCH, SCH40S 300#, A694 F65, ASME B16.5	US $142.24 Per KG
FLANGES WNRTJ, 1- 13/16 INCH, SCH 12.7, A694 F65, APL 6BX AP10000	US $109.05 Per KG

Types Of High Yield Carbon Steel F65 Flanges

A694 F65 Blind Flange

Grade F65 Carbon Slip On Flange

ASME SA694 F65 Weld Neck Flange

SA 694 F65 Socket Weld Flanges

Carbon Steel F65 Plate Flanges

High Yield F65 Lap Joint Flange

F65 Carbon Steel Threaded Flange

A694 Grade F65 Orifice Flange

Gr F65 Carbon Steel Spectacle Blind Flange

Carbon Steel A694 F65 Flanges Density

Property	Temperature	Value
density measures the amount of mass per unit volume.	20.0 °C	7.8 - 7.9 g/cm³

Find A694 F65 Welding Neck Flanges Weight & Dimensions, Largest Carbon Steel F65 Plate Flanges supplier & exporter In Middle East

ASTM A694 F65 Chemical Composition

ASTM A694 F65 Chemical Composition, Heat Analysis, %
Sulfur [S]	≤0.025
Silicon [Si]	0.15-0.35
Carbon [C]	≤0.30
Manganese [Mn]	≤1.60
Phosphorus [P]	≤0.025

A694 F65 Welding Neck Flange Weight In KG

Nominal Pipe Size	Weight In Weld Neck Flanges In KG
½	2
¾	2
1	3
1¼	3
1½	4
2	6
2½	10
3	11.5
3½	12
4	16.5
5	21
6	26
8	42
10	54
12	88
14	114
16	140
18	165
20	197
22	225
24	268

ASME SA694 F65 Blind Flange Dimensions

Size in (Inch)	Size in (mm)	OD	Thick.	Diameter Of R/F	Height Of R/F	PCD	Number of Bolts	Size Of UNC Bolts	Length Of Machine Bolt	Length Of R/F Stud	Size Of Hole	Size Of ISO Stud	Weight As Per Kilogram
		A	B	C	D	E
1/2	15	90	9.6	34.9	2	60.3	4	1/2	50	55	5/8	M14	0.9
3/4	20	100	11.2	42.9	2	69.9	4	1/2	50	65	5/8	M14	0.9
1	25	110	12.7	50.8	2	79.4	4	1/2	55	65	5/8	M14	0.9
1 1/4	32	115	14.3	63.5	2	88.9	4	1/2	55	70	5/8	M14	1.4
1 1/2	40	125	15.9	73	2	98.4	4	1/2	65	70	5/8	M14	1.8
2	50	150	17.5	92.1	2	120.7	4	5/8	70	85	3/4	M16	2.3
2 1/2	65	180	20.7	104.8	2	139.7	4	5/8	75	90	3/4	M16	3.2
3	80	190	22.3	127	2	152.4	4	5/8	75	90	3/4	M16	4.1
3 1/2	90	215	22.3	139.7	2	177.8	8	5/8	75	90	3/4	M16	5.9
4	100	230	22.3	157.2	2	190.5	8	5/8	75	90	3/4	M16	7.7
5	125	255	22.3	185.7	2	215.9	8	3/4	85	95	7/8	M20	9.1
6	150	280	23.9	215.9	2	241.3	8	3/4	85	100	7/8	M20	11.8
8	200	345	27	269.9	2	298.5	8	3/4	90	110	7/8	M20	20.5
10	250	405	28.6	323.8	2	362	12	7/8	100	115	1	M24	32
12	300	485	30.2	381	2	431.8	12	7/8	100	120	1	M24	50
14	350	535	33.4	412.8	2	476.3	12	1	115	135	1 1/8	M27	64
16	400	595	35	469.9	2	539.8	16	1	115	135	1 1/8	M27	82
18	450	635	38.1	533.4	2	577.9	16	1 1/8	125	145	1 1/4	M30	100
20	500	700	41.3	584.2	2	635	20	1 1/8	140	160	1 1/4	M30	130
24	600	815	46.1	692.2	2	749.3	20	1 1/4	150	170	1 3/8	M33	196

SA694 F65 Swivel Flange Thickness

Normal Size	OD	Minimum WT (T)	Diameter Of R/F	Bolt Holes No.	Dia. Of Holes	B.C.	Bore Of SORF ID	Bore Of WNRF ID	Dia. Of Hub Base	Hub Top Dia.	Length Of SORF	Length Of WNRF
1⁄2	3.50	0.38	1.38	4	0.62	2.38	0.88	0.62	1.19	0.84	0.56	1.81
3⁄4	3.88	0.44	1.69	4	0.62	2.75	1.09	0.82	1.50	1.05	0.56	2.00
1	4.25	0.50	2.00	4	0.62	3.12	1.36	1.05	1.94	1.32	0.62	2.12
11⁄4	4.62	0.56	2.50	4	0.62	3.50	1.70	1.38	2.31	1.66	0.75	2.19
11⁄2	5.00	0.62	2.88	4	0.62	3.88	1.95	1.61	2.56	1.90	0.81	2.38
2	6.00	0.69	3.62	4	0.75	4.75	2.44	2.07	3.06	2.38	0.94	2.44
21⁄2	7.00	0.81	4.12	4	0.75	5.50	2.94	2.47	3.56	2.88	1.06	2.69
3	7.50	0.88	5.00	4	0.75	6.00	3.57	3.07	4.25	3.50	1.12	2.69
31⁄2	8.50	0.88	5.50	8	0.75	7.00	4.07	3.55	4.81	4.00	1.19	2.75
4	9.00	0.88	6.19	8	0.75	7.50	4.57	4.03	5.31	4.50	1.25	2.94
5	10.00	0.88	7.31	8	0.88	8.50	5.66	5.05	6.44	5.56	1.38	3.44
6	11.00	0.94	8.50	8	0.88	9.50	6.72	6.07	7.56	6.63	1.50	3.44
8	13.50	1.06	10.62	8	0.88	11.75	8.72	7.98	9.69	8.63	1.69	3.94
10	16.00	1.12	12.75	12	1.00	14.25	10.88	10.02	12.00	10.75	1.88	3.94
12	19.00	1.19	15.00	12	1.00	17.00	12.88	12.00	14.38	12.75	2.12	4.44
14	21.00	1.31	16.25	12	1.12	18.75	14.14	13.25	15.75	14.00	2.19	4.94
16	23.50	1.38	18.50	16	1.12	21.25	16.16	15.25	18.00	16.00	2.44	4.94
18	25.00	1.50	21.00	16	1.25	22.75	18.18	17.25	19.88	18.00	2.62	5.44
20	27.50	1.62	23.00	20	1.25	25.00	20.20	19.25	22.00	20.00	2.81	5.62
22	29.50	1.75	25.25	20	1.38	27.25	22.22	21.25	24.25	22.00	3.07	5.82
24	32.00	1.81	27.25	20	1.38	29.50	24.25	-	-	-	-	-

We Offer High Yield F65 Lap Joint/ Threaded Flange In Almost All Sizes And Schedule, Bolt Size and Pressure Rating Of A694 Grade F65 Orifice Flange

ASTM A694 F65 Flanges Bolt Size

Size in (Inches)	Size in (Millimeter)	Bolts Number	Bolts Size In UNC	Stud Length (RF)	Stud Size In ISO	Machine Bolts Length
1/2	15	4	1/2	55	M14	50
3/4	20	4	1/2	65	M14	50
1	25	4	1/2	65	M14	55
1 1/4	32	4	1/2	70	M14	55
1 1/2	40	4	1/2	70	M14	65
2	50	4	5/8	85	M16	70
2 1/2	65	4	5/8	90	M16	75
3	80	4	5/8	90	M16	75
3 1/2	90	8	5/8	90	M16	75
4	100	8	5/8	90	M16	75
5	125	8	3/4	95	M20	85
6	150	8	3/4	100	M20	85
8	200	8	3/4	110	M20	90
10	250	12	7/8	115	M24	100
12	300	12	7/8	120	M24	100
14	350	12	1	135	M27	115
16	400	16	1	135	M27	115
18	450	16	1 1/8	145	M30	125
20	500	20	1 1/8	160	M30	140
24	600	20	1 1/4	170	M33	150

ASTM A694 F65 Pressure Rating

maximum pressure In (bars)

Temp in C°	150 Class	300 Class	400 Class	600 Class	900 Class	1500 Class	2500 Class
-29 / 38	19.6	51.1	68.1	102.1	153.2	255.3	425.5
50	19.2	50.1	66.8	100.2	150.4	250.6	417.7
100	17.7	46.6	62.1	93.2	139.8	233	388.3
150	15.8	45.1	60.1	90.2	135.2	225.4	375.6
200	13.8	43.8	58.4	87.6	131.4	219	365
250	12.1	41.9	55.9	83.9	125.8	209.7	349.5
300	10.2	39.8	53.1	79.6	119.5	199.1	331.8
325	9.3	38.7	51.6	77.4	116.1	193.6	322.6
350	8.4	37.6	50.1	75.1	112.7	187.8	313
375	7.4	36.4	48.5	72.7	109.1	181.8	303.1
400	6.5	34.7	46.3	69.4	104.2	173.6	289.3
425	5.5	28.8	38.4	57.5	86.3	143.8	239.7
450	4.6	23	30.7	46	69	115	191.7
475	3.7	17.4	23.2	34.9	52.3	87.2	145.3
500	2.8	11.8	15.7	23.5	35.3	58.8	97.9

maximum pressure In (PSI)

Temp in (°F)	150 Class	300 Class	400 Class	600 Class	900 Class	1500 Class	2500 Class
-20 to 100	290	750	1000	1500	2250	3750	6250
200	260	750	1000	1500	2250	3750	6250
300	230	730	970	1455	2185	3640	6070
400	200	705	940	1410	2115	3530	5880
500	170	665	885	1330	1995	3325	5540
600	140	605	805	1210	1815	3025	5040
650	125	590	785	1175	1765	2940	4905
700	110	570	755	1135	1705	2840	4730
750	95	505	670	1010	1510	2520	4200
800	80	410	550	825	1235	2060	3430
850	65	270	355	535	805	1340	2230
900	50	170	230	345	515	860	1430
950	35	105	140	205	310	515	860
1000	20	50	70	105	155	260	430

A694 Grade F52 Slip On Flanges Tolerance

OD *
≤ 24 = 1.6 (mm)	> 24 = ± 3.2 (mm)
ID
≤ 10 = ± 0.8 (mm)	≥ 12 = + 1.6 (mm) / - 0 (mm)
Hub OD
≤ 12 = + 2.4 (mm) / - 1.6 (mm)	≥ 14 = ± 3.2 (mm)
Drilling
B.C.= 1.6 (mm)	Spacing Of Bolt Hole = ± 0.8 (mm)
Eccentricity Of Bolt Circle
≤ 2.1/2 = 0.8 (mm) max.	≥ 3 = 1.6 (mm) max.
Thick.
≤ 18 = + 3.2 (mm) / - 0	≥ 20 = + 4.8 (mm) / - 0
thru Hub Length
≤ 18 = + 3.2 (MM) / - 0.8 (MM)	≥ 20 = + 4.8 (MM) / - 1.6 (MM)
Contact Face Dia.
1.6 MM R/F = ± 0.8 MM	6.35 MM R/F, Tongue and Groove