ASTM A234 WP5 Fittings

ASME SA234 Cl1 WP5 Elbow and Alloy Steel WP5 Tee Fittings manufacturer in UAE


ASTM A234 WP5 Fittings

How A234 WP5 Buttweld Reducer Decrease Pipe Size To Avoid Failure?

A reducer fitting is often used to lower the suction pipe's diameter to that of the pump's suction end flange. Most often, reducers are used to adjust the pipe size in order to connect to current small or large piping bores or to satisfy the process system's flow needs.
ASTM A234 WP5 Fittings WP5 specification includes seamless or welded wrought carbon steel. ASTM A234 WP5 Pipe Fittings are frequently utilised in the production of pressure vessels. These fittings are suitable for low to high temperatures and may also be utilised in pressure pipe systems.

ASTM A234 WP5 Fittings Elements & Their Effects

Alloy Steel WP5 Elbow is a Standard Requirement for steel pipe fittings manufactured from carbon and alloy steel for medium applications. It applies to both seamless or welded steel fittings. These fittings are constructed from dead steel, forgings, and plates, as well as constant or fusion welded pipe products with filler metal.In piping systems, we often need to modify the transmission orientation; change the flow rate of fluids. Open and shut the pipes.Steel pipe fittings will be employed to execute these tasks.

manufacturer of A234 WP5 Buttweld Pipe Cap and SA234 WP5 Stub End in Dubai, browse our range of Alloy Steel WP5 45 Seamless Reducer and Cross Fittings online

Thickness Requirement Of Alloy Steel WP5 Elbow

The requirements for alloy steel WP5 elbow is around 5.5 to 6cm. The A234 WP5 Buttweld Reducer Fittings can be used in both ambient and increased temperature situations. The thickness will vary according to the needs and requirements. These fittings are frequently seen in pipe systems and pressure vessels. The ASTM A234 Alloy Steel WP5 Fittings are formed in such a way that the part does not cause harmful defects. The forming procedure is to be performed at a high temperatures.After which the A234 Gr WP5 Fittings are chilled to a temperature below the critical scope under appropriate circumstances.As rapid cooling might cause deficiencies, so the possibilities of the components developing a harmful defect are lower.

supplier Of Grade WP5 Pipe Bend and ASME SA234 WP5 LR/ SR Elbow at Competitive Price for Oil And Gas Industry In Middle East, Check Attributes Of A234 Grade Wp5




Specialized in manufacturing

ASTM A234 WP5 Fittings

ASTM A234 WP5 Pipe Fittings Are Butt Welding Ends,commonly Used To Be Welded With The Astm A335 P5 Steel Pipes.

Size

1/2 Inches To 48 Inches

SCH

SCH 10S To SCH 180

Types

Elbow, Tee, Reducer, End Cap

ASME

B16.9
ASTM A234 Alloy Steel WP5 Pipe Fittings


Product Form : A234 WP5 Material



Attributes Of A234 Grade Wp5
Attributes Of A234 Grade Wp5
  • Corrosion resistance
  • Good dimensional accuracy
  • Anti-corrosive
  • High tensile strength
  • Hardness
  • Durability/reliability
  • high-temperature atmosphere
Testing Of ASTM A234 Wp5 Fittings
Testing Of ASTM A234 Wp5 Fittings
  • Hardness test
  • Flattening/flaring test
  • Mechanical/chemical test
  • Macro/micro test
  • Pitting resistance test
  • Intergranular corrosion test
  • Radiography/hydrostatic test
ASTM A234 WP5 Elbow Packaging
ASTM A234 WP5 Elbow Packaging
  • standard packaging technique is used like :
  • Carton boxes
  • Shrink-wrapped
  • Wooden crates boxes
  • Pallets boxes

Reason for Choosing Us

We have facility to produce advance work various industrial applications
based on specially developed technology.

On Time Delivery

Smart Technology

Easy & Affordable

Qualified Specialists

Clean & Unpolluted

24/7 Support



ASTM A234 WP5 Fittings Specification


Specification ASTM A234 WP5 Fittings
Testing Hydrostatic testing machine
Magnetic particle detector
Direct-reading Spectrograph
UI trasonic flaw detector
Transportation In Air & Ocean
Size Of Manufacturer BW (Buttweld) 1½" NB to 80" NB
SMLS (Seamless) 4” to 24”
Weld (Welded) 2” to 36”
Fittings Connection Types Buttweld/ Threaded and Instrumentation/ Hydraulic/ Forged
Types Of Schedule SCH 5S To SCH XXS
Available Packing Packing In Plywood Box And Plywood Pallet
Equipment Pushing Machine
Press machine
electric bevelling machine
Brand Name Schulzmann
Certificate ISO
Payment Type L/C,T/T,D/P,Paypal
Types Buttweld Elbow (45 Deg Elbow/ 90 Deg Elbow/ 180 Deg Elbow/ With Long Radius & Short Radius Elbow)

Buttweld Tee ( Reducing Tee, Equal Tee, Unequal Tee, Lateral Tee, Straight Tee, Barred Tee, Split Tee)

Buttweld Cap (Square Cap/ Round Cap/ Rectangular Cap/ “U” Shape Cap/ “I” Shape Cap/ Oval End)

Buttweld Reducer (Eccentric Reducer And Concentric Reducer)

Buttweld Cross (Reducing & Equal Cross)

Buttweld Bend ( Long Radius Bend/ 3D Bend/ 5D Bend)
Available Coating Oil Black Paint
Yellow Transparent
Anti-rust Paint
Zinc Plated
Cold and Hot Dip Galvanized
Manufacturing Productivity 600 ton per month
Supply Ability 500 Ton Per Month
Use In Marine & dredging
Sanitation
Process Instrumentation
Oil and Gas
Petrochemical/ Refinery/Chemical
Power etc.


SA234 WP5 Buttweld Fittings Price List


Description Price In US ($)
90 DEG LR ELBOW, SA234 GR WP5, 32 THK 27.75MM, BEVELLED END US $5.43 Per Unit
45 DEG LR ELBOW SA234 GR WP5, 28 THK 24.27MM, BEVELLED END US $6.52 Per Unit
ECCENTRIC REDUCER, WP5, 38 36 THK 32.95MM X THK 31.21MM US $5.99 Per Unit
BW FITTING, ANSI B16.9, END CAPS, 8 INCH, SCH 80/S US $171.54 Per Unit
90 DEG LR ELBOW, SA234 GR WP5, 28 THK 25.14MM, SEAMLESS US $6.17 Per Unit
90 DEG LR ELBOW, SA234 GR WP5, 32 THK 28.74MM, BEVELLED END US $6.00 Per Unit
45 DEG LR ELBOW, SA234 GR WP5, 32 THK 27.75MM, BEVELLED END US $6.17 Per Unit


Types Of ASTM A234 WP5 Alloy Steel Pipe Fittings


Alloy Steel WP5 45 Deg Elbow

Alloy Steel WP5 45 Deg Elbow

A234 WP5 90 Deg Elbow

A234 WP5 90 Deg Elbow

ASTM A234 WP5 180 Deg Elbow

ASTM A234 WP5 180 Deg Elbow

A234 Gr WP5 Long Radius Elbow

A234 Gr WP5 Long Radius Elbow

SA234 WP5 Short Radius Elbow

SA234 WP5 Short Radius Elbow

 Alloy Steel WP5 1D Elbow

Alloy Steel WP5 1D Elbow

WP5 3D Elbow

WP5 3D Elbow

ASME SA 234 WP5 5D Elbow

ASME SA 234 WP5 5D Elbow

Grade WP5 10D Elbow

Grade WP5 10D Elbow

Alloy Steel WP5 Reducing Tee

Alloy Steel WP5 Reducing Tee

A234 WP5 Equal Tee

A234 WP5 Equal Tee

ASME SA 234 Gr WP5 Lateral Tee

ASME SA 234 Gr WP5 Lateral Tee

SA234 Grade WP5 Split Tee

SA234 Grade WP5 Split Tee

WP5 Alloy Steel Concentric Reducer

WP5 Alloy Steel Concentric Reducer

SA 234 WP5 Eccentric Reducer

SA 234 WP5 Eccentric Reducer

Grade WP5 Pipe Bend

Grade WP5 Pipe Bend

ASME SA234 WP5 Reducing Cross

ASME SA234 WP5 Reducing Cross

ASTM A234 WP5 Stub End

ASTM A234 WP5 Stub End

A234 WP5 Fittings

A234 WP5 Fittings

ASTM A234 WP5 Pipe Fittings

ASTM A234 WP5 Pipe Fittings

Alloy Steel WP5 Buttweld Fittings

Alloy Steel WP5 Buttweld Fittings



ASTM A234 WP5 180 Deg Bend Dimensions


ASTM A234 WP5 180 Deg Bend Dimensions


NPS Daimeter O.D. at Bevel Center to Center (O) Back to Face (K)
LR SR LR SR
1/2 15 21.3 76   48  
1 25 33.4 76 51 56 41
1-1/4 32 42.2 95 64 70 52
1-1/2 40 48.3 114 76 83 62
2 50 60.3 152 102 106 81
2-1/2 65 73.0 190 127 132 100
3 80 88.9 229 152 159 121
3-1/2 90 101.6 267 178 184 140
4 100 114.3 305 203 210 159
5 125 141.3 381 254 262 197
6 150 168.3 457 305 313 237
8 200 219.1 610 406 414 313
10 250 273.0 762 508 518 391
12 300 323.8 914 610 619 467
14 350 355.6 1067 711 711 533
16 400 406.4 1219 813 813 610
18 450 457 1372 914 914 686
20 500 508 1524 1016 1016 762
22 550 559 1676 1118 1118 838
24 600 610 1829 1219 1219 914


manufacturer of WP5 Alloy Steel Eccentric / Concentric Reducer and A234 WP5 Class 1 Reducing/ Equal/ Unequal/ Lateral Tee offers Ultrasonic Testing of Butt Weld Joints


  • A234 WP5 Chemical Composition
    Grade ASTM A234 WP5 Fittings
    P ≤0.03
    Cr 4-6
    Mo 0.44-0.65
    C ≤0.15
    Mn ≤0.6
    Si ≤0.5
    S ≤0.04


  • WP5 Fittings Mechanical Properties
    Grade ASTM A234 WP5 Fittings
    Yield Strength (Mpa) ≥205
    Elongation % ≥20
    Tensile Strength (Mpa) 415 - 585




SA234 Gr WP5 Elbow Tolerance


ASME B16.9 Type45 And 90 degree elbow180 Degree Returns
NPSOutside Diameter
at Bevel
Inside Diameter
at End
WT
t / t1
Center to End Daimeter (A-B-C-M)Center to Center Daimeter
(O)
Back-Face Daimeter
(K)
Align-ment of Ends
(U)
1/2 a 2 1/210,8Not2771
3 a 3 1/211,6less2771
4+2 -11,6than2771
5 a 6+3 -11,687,50%2771
821,6of nominal2771
10+4 -33,2WT2772
12 a 18+4 -33,231072
20 a 24+6 -54,831072
26 a 30+7 -54,83----
32 a 48+7 -54,85----


Alloy Steel WP5 Equal Tee Weight


Normal Size LBS KG
1/2 0.35 0.16
3/4 0.45 0.2
1 0.75 0.34
1.1/4 1.3 0.59
1.1/2 2 0.91
2 3.5 1.59
2.1/2 6 2.72
3 7 3.18
3.1/2 9 4.08
4 12 5.44
5 21 9.53
6 34 15.42
8 55 24.95
10 85 38.56
12 120 54.43
14 165 74.84
16 195 88.45
18 249 112.94
20 342 155.13
22 414 187.79
24 528 239.5
26 770 349.27
30 1060 480.81
36 1490 675.85


Bevelled Ends ASTM A234 WP5 Alloy Steel Pipe Fittings and SA234 Gr WP5 45/ 90 Degree Elbow manufacturer in UAE


Temperature Of ASTM A234 WP5 Buttweld Fittings


Maximum Allowable Stresses

Temperature Stress
40 118
65 118
100 118
125 118
150 118
200 118
250 118
300 118
325 118
350 117
375 105
400 88.9
425 75.3
450 62.7
475 45.5
500 31.6
525 21.9
550 12.7

*Stresses & *temperature.: max. allowable stress values, MPa, for metal temp., °C, not exceeding.



Application For ASME SA234 WP5 Cl1 Fittings


  • Pharmaceutical Equipment
  • Chemical Equipment
  • Heat Exchangers
  • Power Generation
  • Gas Processing
  • Pulp and Paper Industry
  • Petrochemicals
Application For ASME SA234 WP5 Cl1 Fittings