Density
ASTM A182 F11 Flanges: Heat Resistance
The American standard ASTM provides many grades for various products. The ASTM A182 F11 Flanges are one device that works well in harsh circumstances. It is utilized in various applications merely needed for elemental corrosion resistance. Weld Neck Flanges made of A182 Grade F11 have good hardness and toughness.
For the transportation of corrosive gases and liquids at high temperatures, ASME Flanges are employed. They provide good impact protection, stiffness, and high creep power.
They can withstand temperatures as high as 530 degrees Celsius. Molybdenum has been added to flanges, involving high temperatures, molybdenum aids in delaying the coagulation and production of coarse carbide.
When Would You Use an Alloy Steel F11 Slip-On Flange?
This type of steel's Asme SA 182 Gr F11 Blind Flanges is suitable in demanding high-heat environments. However, due to their absence of a more significant proportion of the components above in their chemical makeup.They are not advised to be utilized in situations that need corrosion resistance. However, ASTM A182 F11 Blind Flanges have better corrosion resistance characteristics than standard carbon steel alloys. Low alloy steels outperform carbon steel alloys in other aspects, though.
The tensile and yield hardness, roughness, and longevity of their alloy are all improved by adding even minuscule quantities of chromium and molybdenum. The Alloy Steel F11 Slip On Flangecan be treated to increase their yield strength.Typically, the alloy is subjected to heat treatments, including tempering, melting, and normalizing, each of which has a specific function.
SA 182 Gr F11 Blind Flanges Face and Thickness Requirements
Molybdenum is a helpful element, but too much of it can make Gr F11 Plate Flanges less creep ductile. the thickness requirements of the flange will vary from 1/2 to 48 inches as per the needs. The thickness is available in Sch 10s, 40s, and 160s.
Table of content
ASTM A182 F11 Flanges
Size
Class
Schedule
ASME
Properties Of ASTM A182 Alloy Steel F11 Flanges
Density
Hardness
Tensile Strength
ASTM A182 F11 Material Specification
Specifications | ASTM A182 F11 Flanges |
---|---|
Certificate | ISO |
EN Standard | 6Bar/ 10Bar/ 16Bar/ 25Bar/ 40Bar |
Methods Of Forging | Casting Forging Rolling Cutting |
DIN Standard | PN6 To PN64 |
Testing | Hydrostatic testing machine Magnetic particle detector Direct-reading Spectrograph UI trasonic flaw detector |
Manufacturing Productivity | 600 ton per month |
Supply Ability | 400 Ton Per Month |
Class | Class 150 to 2500 |
Equipment | Pushing Machine Press machine electric bevelling machine |
Face Type | RF (Raised Face), RTJ (Ring Type Joint) |
Payment Type | L/C,T/T,D/P,Paypal |
Transportation In | Air & Ocean and Land |
Available Packing | Packing In Plywood Box And Plywood Pallet |
Supporting Material For Flanges | Gasket/ Ring Joint/ Flanges Bolts |
Use In | Marine & dredging Sanitation Process Instrumentation Oil and Gas Petrochemical/ Refinery/Chemical Power etc. |
JIS Standard | 5K/ 10K/ 16K 20K/ 30K/ 40K/ 63K |
Size | 1/2” to 24” (customized diameters: up to 60”.) |
Brand Name | Schulzmann |
Price List Of ASTM A182 F11 Flanges
Description | Price In US ($) |
---|---|
4SCH XXS 2500# A182 F11, FLANGES WNRTJ, ASME B16.5 | US $2246.79 Per KG |
2X3/4 SCH 12.7 2500#, ASTM A182 F11, FLANGES WNRTJ, ASME B16.5 | US $98.95 Per KG |
4.1/16 SCH20 62 10000#, FLANGES WNRTJ, A182 F11, API 6BX API 10000 | US $744.23 Per KG |
WNRTJ, 2X1, SCH40S, 300#, REDUCING FLANGES, ASTM A182 F11, ASME B16.5 | US $141.37 Per KG |
1- 13/16 AP10000 SCH 12.7, FLANGES WNRTJ, A182 F11, APL 6BX | US $108.38 Per KG |
2X1 SCHXXS 2500# ASTM A182 F11, REDUCING FLANGES, WNRTJ, ASME B16.5 | US $98.95 Per KG |
WNRTJ, 2X1 SCH160 300#, REDUCING FLANGES, ASTM A182 F11, ASME B16.5 | US $32.98 Per KG |
2X1 SCH12.7 2500#, REDUCING FLANGES, WNRTJ, ASTM A182 F11 ASME B16.5 | US $98.95 Per KG |
Types Of ASTM A182 F11 Alloy Steel Flanges
A182 F11 Threaded Flanges
Alloy Steel F11 Orifice Flanges
SA 182 F11 Spectacle Blind Flanges
ASME SA182 F11 Socket Weld Flange
SA 182 F11 CL2 Plate Flange
A182 F11 Class 1 Lap Joint Flange
UNS K11572 Reducing Flange
F11 Alloy Steel Raised Face Flange
SA 182 Gr F11 CL 3 RTJ Flange
Alloy Steel F11 Blind Flange
SA 182 F11 CL1 Slip On Flange
Grade F11 CL2 Weld Neck Flange
A182 F11 Flange
Class 150 Grade F11 Flange
Alloy Steel F11 Flange
PN Numbers Of Alloy Steel F11 Flanges
P# | UNS | KSI(MPa) | ISO | Type |
---|---|---|---|---|
4 | K11597 | 60(415) | 5.1 | F11 Class 1 |
4 | k11572 | 70(485) | 5.1 | F11 Class 2 |
4 | k11572 | 75(515) | 5.1 | F11 Class 3 |
UNS Designation Of Grade F11 Flanges
Grade Name | UNS Designation |
---|---|
F11 CL1 | 1.25Cr–0.5Mo–Si |
F11 CL2 | 1.25Cr–0.25Mo–Si |
F11 CL3 | 1.25Cr–0.5Mo–Si |
SA182 F11 Slip On Flanges Tensile Strength
F11 Class 1 | 60[415] |
---|---|
F11 Class 2 | 70[485] |
F11 Class 3 | 75[515] |
Component Elements Properties | Original Value |
---|---|
Carbon, C | 0.10 - 0.15 % |
Manganese, Mn | 0.30 - 0.80 % |
Sulfur, S | <= 0.040 % |
Molybdenum, Mo | 0.44 - 0.65 % |
Phosphorus, P | <= 0.040 % |
Silicon, Si | 0.50 - 1.0 % |
Chromium, Cr | 1.0 - 1.5 % |
Iron, Fe | 95.8 - 97.7 % |
STANDARD | UNS Number | WNR. | DIN |
ASTM A182 F11 Flanges | K11572 | - | - |
Temp (°F) | (150 LB) |
-20 to 100 | 265 |
200 | 260 |
300 | 230 |
400 | 200 |
500 | 170 |
600 | 140 |
650 | 125 |
700 | 110 |
750 | 95 |
800 | 80 |
850 | 65 |
900 | 50 |
950 | 35 |
1000 | 20 |
ASTM A182 F11 Mechanical Properties
Mechanical Properties | Original Value |
---|---|
Reduction of Area | >= 30 % |
Tensile Strength, Ultimate | 485MPa |
Tensile Strength, Yield | 275MPa |
Hardness, Brinell | 143 - 207 |
Elongation at Break | 20 % |
UNS K11572 Weld Neck Flanges Weight Chart
Nominal Pipe Size | Weight In Weld Neck Flange |
---|---|
½ | 2 |
¾ | 2 |
1 | 3 |
1¼ | 3 |
1½ | 4 |
2 | 6 |
2½ | 10 |
3 | 11.5 |
3½ | 12 |
4 | 16.5 |
5 | 21 |
6 | 26 |
8 | 42 |
10 | 54 |
12 | 88 |
14 | 114 |
16 | 140 |
18 | 165 |
20 | 197 |
22 | 225 |
24 | 268 |
A182 F11 Class 3 Blind Flange Dimensions
Size in (Inch) | Size in (mm) | OD | Thick. | Diameter Of R/F | Height Of R/F | PCD | Number of Bolts | Size Of UNC Bolts | Length Of Machine Bolt | Length Of R/F Stud | Size Of Hole | Size Of ISO Stud | Weight As Per Kilogram |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | B | C | D | E | |||||||||
1/2 | 15 | 90 | 9.6 | 34.9 | 2 | 60.3 | 4 | 1/2 | 50 | 55 | 5/8 | M14 | 0.9 |
3/4 | 20 | 100 | 11.2 | 42.9 | 2 | 69.9 | 4 | 1/2 | 50 | 65 | 5/8 | M14 | 0.9 |
1 | 25 | 110 | 12.7 | 50.8 | 2 | 79.4 | 4 | 1/2 | 55 | 65 | 5/8 | M14 | 0.9 |
1 1/4 | 32 | 115 | 14.3 | 63.5 | 2 | 88.9 | 4 | 1/2 | 55 | 70 | 5/8 | M14 | 1.4 |
1 1/2 | 40 | 125 | 15.9 | 73 | 2 | 98.4 | 4 | 1/2 | 65 | 70 | 5/8 | M14 | 1.8 |
2 | 50 | 150 | 17.5 | 92.1 | 2 | 120.7 | 4 | 5/8 | 70 | 85 | 3/4 | M16 | 2.3 |
2 1/2 | 65 | 180 | 20.7 | 104.8 | 2 | 139.7 | 4 | 5/8 | 75 | 90 | 3/4 | M16 | 3.2 |
3 | 80 | 190 | 22.3 | 127 | 2 | 152.4 | 4 | 5/8 | 75 | 90 | 3/4 | M16 | 4.1 |
3 1/2 | 90 | 215 | 22.3 | 139.7 | 2 | 177.8 | 8 | 5/8 | 75 | 90 | 3/4 | M16 | 5.9 |
4 | 100 | 230 | 22.3 | 157.2 | 2 | 190.5 | 8 | 5/8 | 75 | 90 | 3/4 | M16 | 7.7 |
5 | 125 | 255 | 22.3 | 185.7 | 2 | 215.9 | 8 | 3/4 | 85 | 95 | 7/8 | M20 | 9.1 |
6 | 150 | 280 | 23.9 | 215.9 | 2 | 241.3 | 8 | 3/4 | 85 | 100 | 7/8 | M20 | 11.8 |
8 | 200 | 345 | 27 | 269.9 | 2 | 298.5 | 8 | 3/4 | 90 | 110 | 7/8 | M20 | 20.5 |
10 | 250 | 405 | 28.6 | 323.8 | 2 | 362 | 12 | 7/8 | 100 | 115 | 1 | M24 | 32 |
12 | 300 | 485 | 30.2 | 381 | 2 | 431.8 | 12 | 7/8 | 100 | 120 | 1 | M24 | 50 |
14 | 350 | 535 | 33.4 | 412.8 | 2 | 476.3 | 12 | 1 | 115 | 135 | 1 1/8 | M27 | 64 |
16 | 400 | 595 | 35 | 469.9 | 2 | 539.8 | 16 | 1 | 115 | 135 | 1 1/8 | M27 | 82 |
18 | 450 | 635 | 38.1 | 533.4 | 2 | 577.9 | 16 | 1 1/8 | 125 | 145 | 1 1/4 | M30 | 100 |
20 | 500 | 700 | 41.3 | 584.2 | 2 | 635 | 20 | 1 1/8 | 140 | 160 | 1 1/4 | M30 | 130 |
24 | 600 | 815 | 46.1 | 692.2 | 2 | 749.3 | 20 | 1 1/4 | 150 | 170 | 1 3/8 | M33 | 196 |
ASTM A182 F11 Flanges Bolts Size
Size in (Inches) | Size in (Millimeter) | Bolts Number | Bolts Size In UNC | Stud Length (RF) | Stud Size In ISO | Machine Bolts Length |
---|---|---|---|---|---|---|
1/2 | 15 | 4 | 1/2 | 55 | M14 | 50 |
3/4 | 20 | 4 | 1/2 | 65 | M14 | 50 |
1 | 25 | 4 | 1/2 | 65 | M14 | 55 |
1 1/4 | 32 | 4 | 1/2 | 70 | M14 | 55 |
1 1/2 | 40 | 4 | 1/2 | 70 | M14 | 65 |
2 | 50 | 4 | 5/8 | 85 | M16 | 70 |
2 1/2 | 65 | 4 | 5/8 | 90 | M16 | 75 |
3 | 80 | 4 | 5/8 | 90 | M16 | 75 |
3 1/2 | 90 | 8 | 5/8 | 90 | M16 | 75 |
4 | 100 | 8 | 5/8 | 90 | M16 | 75 |
5 | 125 | 8 | 3/4 | 95 | M20 | 85 |
6 | 150 | 8 | 3/4 | 100 | M20 | 85 |
8 | 200 | 8 | 3/4 | 110 | M20 | 90 |
10 | 250 | 12 | 7/8 | 115 | M24 | 100 |
12 | 300 | 12 | 7/8 | 120 | M24 | 100 |
14 | 350 | 12 | 1 | 135 | M27 | 115 |
16 | 400 | 16 | 1 | 135 | M27 | 115 |
18 | 450 | 16 | 1 1/8 | 145 | M30 | 125 |
20 | 500 | 20 | 1 1/8 | 160 | M30 | 140 |
24 | 600 | 20 | 1 1/4 | 170 | M33 | 150 |