Concentric Reducer
Concentric vs Eccentric Reducer: When to Use Which?
The pipes have identical centre points in the cone-shaped concentric reducer, in contrast to mismatched centre lines in the eccentric ones. Both of these have an impact on the flow. Concentric reducers will typically be used. Eccentric reducers are utilised when the pipes must keep the same top or bottom elevation. Eccentric reducers are typically employed when air and fluids run together to prevent retaining the air within the device.
ASME B16.9 Reducer Installation
A ASME B16.9 Reducerexhibits adequate resistance to a variety of oxidising conditions and highly resistant to chloride-ion stress-corrosion splitting. Such Reducer pipe fittings can connect pipes of different diameters on pipe sections that fall on the same axis. To avoid retaining air in the pipe, they reducers must be positioned with their flat side facing up in the pipe.
Stainless Steel Reducer in Process Piping?
An element used in pipes to change the size in compliance with the internal radius is a stainless steel reducer. Here, the width of the reduction is equal to the median of the pipe diameters, both small and large. In this case, the reducer may be utilised as a funnel or a diffuser. The reducer aids in accommodating the hydraulic stream or existing piping of various sizes. The reducers can be produced using a variety of techniques. These are constructed using welded pipes that have the necessary filler material.
Uses of Carbon Steel Reducer
Power facilities and chemical manufacturers both employ the use of a carbon steel reducer. The piping system becomes dependable and small as a result. It shields against any damaging impact or thermal distortion to the piping system. It is simple to install and eliminates leaks when placed on the pressure circle. The reducers with nickel or chrome coatings are excellent for high vapour lines because they prolong product life and inhibit corrosion.
Table of content
ASME B16.9 Reducer
Size
SCH
ASTM
ASME
Two Types Of Stainless Steel Pipe Reducer
Concentric Reducer
Eccentric Reducer
Stainless Steel Reducer Specification
Specifications | ASME B16.9 Reducer |
---|---|
Use In | Marine & dredging Sanitation Process Instrumentation Oil and Gas Petrochemical/ Refinery/Chemical Power etc. |
Types Of Schedule | SCH 5S To SCH XXS |
Manufacturing Productivity | 900 ton per month |
Supply Ability | 800 Ton Per Month |
Transportation In | Air & Ocean |
manufacturer Types | Big diameter Reducer Large diameter Reducer Small size Reducer |
Types Of Buttweld Reducer manufacturer in UAE | Buttweld Reducer ( Concentric & Eccentric Reducers) |
Size Of Manufacturer | BW (Buttweld) 1½" NB to 80" NB SMLS (Seamless) 4” to 24” Weld (Welded) 2” to 36” |
Standard | MSS SP-75 ASME B16.9 DIN 2616 JIS B2312 |
Available Packing | Packing In Plywood Box And Plywood Pallet |
Available Coating | Oil Black Paint Yellow Transparent Anti-rust Paint Zinc Plated Cold and Hot Dip Galvanized |
Fittings Connection Types | Buttweld/ Threaded and Instrumentation/ Hydraulic/ Forged |
Brand Name | Schulzmann |
Description | Price In US ($) |
---|---|
DN 400X350, SCH XS, Carbon Steel, WPL6, Concentric Reducers, BW | US $ 268.51 Per KG |
DN 300X200, SCH 120, Carbon Steel, SA 420 GR WPL6, Eccentric Reducers, Buttweld | US $ 508.75 Per KG |
DN 100X40, Carbon Steel, Concentric Reducers, SCH XS/80, SA234 GR.WPB | US $ 8.35 Per PCS |
A234 GR. WPB, CS Concentric Reducers SCH 40, DN 150*100 | US $ 100.79 Per KG |
DN 100X40, Concentric Reducers, Carbon Steel, SCH XS/80, SA234 GR.WPB | US $ 47.34 Per KG |
A234 GR. WPB DN 200*150 CS, CONCENTRIC REDUCE, SCH 40 | US $ 158.09 Per KG |
Eccentric Reducers, SA 420 GR.WPL6 DN 300X200,SCH 120, BUTTWELD | US $ 508.75 Per KG |
SCH 40X80, DN 80X50, Eccentric Reducers, SA234 GR.WPB | US $ 8.35 Per PCS |
ASME B16.9 Concentric Reducers
Buttweld Concentric Reducers
Aluminum Concentric Reducers
Grooved Concentric Reducers
Carbon Steel Concentric Reducers
Copper Concentric Reducers
Mild Steel Eccentric Reducers
ASME B16.9 Eccentric Reducers
Ductile Iron Eccentric Reducers
Stainless Steel Eccentric Reducers
Carbon Steel Eccentric Reducers
SS Pipe Reducers
Con Reducer
Stainless Steel Pipe Reducer Fittings
Ecc Reducers
Grades Of Stainless Steel Pipe Reducer
Concentric Reducer
Normal Pipe Size | Outside Diameter Of (D) |
Outside Diameter Of (D1) |
Length Of (H) |
3/4 - 1/2 | 26.7 | 21.3 | 38 |
1 - 1/2 | 33.4 | 21.3 | 51 |
1 - 3/4 | 33.4 | 26.7 | 51 |
1.1/4 - 1/2 | 42.2 | 21.3 | 51 |
1.1/4 - 3/4 | 42.2 | 26.7 | 51 |
1.1/4 - 1 | 42.2 | 33.4 | 51 |
1.1/2 - 1/2 | 48.3 | 21.3 | 64 |
1.1/2 - 3/4 | 48.3 | 26.7 | 64 |
1.1/2 - 1 | 48.3 | 33.4 | 64 |
1.1/2 - 1.1/4 | 48.3 | 42.2 | 64 |
2 - 3/4 | 60.3 | 26.7 | 76 |
2 - 1 | 60.3 | 33.4 | 76 |
2 - 1.1/4 | 60.3 | 42.2 | 76 |
2 - 1.1/2 | 60.3 | 48.3 | 76 |
2.1/2 - 1 | 73 | 33.4 | 89 |
2.1/2 - 1.1/4 | 73 | 42.2 | 89 |
2.1/2 - 1.1/2 | 73 | 48.3 | 89 |
2.1/2 - 2 | 73 | 60.3 | 89 |
3 - 1.1/4 | 88.9 | 42.2 | 89 |
3 - 1.1/2 | 88.9 | 48.3 | 89 |
3 - 2 | 88.9 | 60.3 | 89 |
3 - 2.1/2 | 88.9 | 73 | 89 |
3.1/2 - 1.1/4 | 101.6 | 42.2 | 102 |
3.1/2 - 1.1/2 | 101.6 | 48.3 | 102 |
3.1/2 - 2 | 101.6 | 60.3 | 102 |
3.1/2 - 2.1/2 | 101.6 | 73 | 102 |
3.1/2 - 3 | 101.6 | 88.9 | 102 |
4 - 1.1/2 | 114.3 | 48.3 | 102 |
4 - 2 | 114.3 | 60.3 | 102 |
4 - 2.1/2 | 114.3 | 73 | 102 |
4 - 3 | 114.3 | 88.9 | 102 |
4 - 3.1/2 | 114.3 | 101.6 | 102 |
5 - 2 | 141.3 | 60.3 | 127 |
5 - 2.1/2 | 141.3 | 73 | 127 |
5 - 3 | 141.3 | 88.9 | 127 |
5 - 3.1/2 | 141.3 | 101.6 | 127 |
5 - 4 | 141.3 | 114.3 | 127 |
6 - 2.1/2 | 168.3 | 73 | 140 |
6 - 3 | 168.3 | 88.9 | 140 |
6 - 3.1/2 | 168.3 | 101.6 | 140 |
6 - 4 | 168.3 | 114.3 | 140 |
6 - 5 | 168.3 | 141.3 | 140 |
8 - 3.1/2 | 219.1 | 101.6 | 152 |
8 - 4 | 219.1 | 114.3 | 152 |
8 - 5 | 219.1 | 141.3 | 152 |
8 - 6 | 219.1 | 168.3 | 152 |
10 - 4 | 273 | 114.3 | 178 |
10 - 5 | 273 | 141.3 | 178 |
10 - 6 | 273 | 168.3 | 178 |
10 - 8 | 273 | 219.1 | 178 |
12 - 5 | 323.9 | 141.3 | 203 |
12 - 6 | 323.9 | 168.3 | 203 |
12 - 8 | 323.9 | 219.1 | 203 |
12 - 10 | 323.9 | 273 | 203 |
14 - 6 | 355.6 | 168.3 | 330 |
14 - 8 | 355.6 | 219.1 | 330 |
14 - 10 | 355.6 | 273 | 330 |
14 - 12 | 355.6 | 323.9 | 330 |
16 - 8 | 406.4 | 219 | 356 |
16 - 10 | 406.4 | 273 | 356 |
16 - 12 | 406.4 | 323.9 | 356 |
16 - 14 | 406.4 | 355.6 | 356 |
18 - 10 | 457 | 273 | 381 |
18 - 12 | 457 | 323.9 | 381 |
18 - 14 | 457 | 355.6 | 381 |
18 - 16 | 457 | 406.4 | 381 |
20 - 12 | 508 | 323.9 | 508 |
20 - 14 | 508 | 355.6 | 508 |
20 - 16 | 508 | 406.4 | 508 |
20 - 18 | 508 | 457 | 508 |
22 - 14 | 559 | 355.6 | 508 |
22 - 16 | 559 | 406.4 | 508 |
22 - 18 | 559 | 457 | 508 |
22 - 20 | 559 | 508 | 508 |
24 - 16 | 610 | 406.4 | 508 |
24 - 18 | 610 | 457 | 508 |
24 - 20 | 610 | 508 | 508 |
24 - 22 | 610 | 559 | 508 |
26 - 18 | 660 | 457 | 610 |
26 - 20 | 660 | 508 | 610 |
26 - 22 | 660 | 559 | 610 |
26 - 24 | 660 | 610 | 610 |
28 - 18 | 711 | 457 | 610 |
28 - 20 | 711 | 508 | 610 |
28 - 24 | 711 | 610 | 610 |
28 - 26 | 711 | 660 | 610 |
30 - 20 | 762 | 508 | 610 |
30 - 24 | 762 | 610 | 610 |
30 - 26 | 762 | 660 | 610 |
30 - 28 | 762 | 711 | 610 |
32 - 24 | 813 | 610 | 610 |
32 - 26 | 813 | 660 | 610 |
32 - 28 | 813 | 711 | 610 |
32 - 30 | 813 | 762 | 610 |
34 - 24 | 864 | 610 | 610 |
34 - 26 | 864 | 660 | 610 |
34 - 30 | 864 | 762 | 610 |
34 - 32 | 864 | 813 | 610 |
36 - 24 | 914 | 610 | 610 |
36 - 26 | 914 | 660 | 610 |
36 - 30 | 914 | 762 | 610 |
36 - 32 | 914 | 813 | 610 |
36 - 34 | 914 | 864 | 610 |
38 - 26 | 965 | 660 | 610 |
38 - 28 | 965 | 711 | 610 |
38 - 30 | 965 | 762 | 610 |
38 - 32 | 965 | 813 | 610 |
38 - 34 | 965 | 864 | 610 |
38 - 36 | 965 | 914 | 610 |
40 - 30 | 1016 | 762 | 610 |
40 - 32 | 1016 | 813 | 610 |
40 - 34 | 1016 | 864 | 610 |
40 - 36 | 1016 | 914 | 610 |
40 - 38 | 1016 | 965 | 610 |
Grade Of Carbon Steel Concentric Reducer
ASME B16 9 Eccentric Reducer Dimensions
Diameter | O.D. Of | End-End |
||
D1*D2 | ||||
DN | Normal Pipe Size | Series (A) | Series (B) | (H) |
20×15 | 3/4×1/2 | 26.9×21.3 | 25×18 | 38 |
20×10 | 3/4×3/8 | 26.9×17.3 | 25×14 | 38 |
25×20 | 1×3/4 | 33.7×26.9 | 32×25 | 51 |
25*15 | 1*1/2 | 33.7*21.3 | 32*18 | 51 |
32*25 | 1.1/4*1 | 42.4*33.7 | 38*32 | 51 |
32*20 | 1.1/4*3/4 | 42.4*26.9 | 38*25 | 51 |
32*15 | 1.1/4*1/2 | 42.4*21.3 | 38*18 | 51 |
40*32 | 1.1/2*1.1/4 | 48.3*42.4 | 45*38 | 64 |
40*25 | 1.1/2*1 | 48.3*33.7 | 45*32 | 64 |
40*20 | 1.1/2*3/4 | 48.3*26.9 | 45*25 | 64 |
40*15 | 1.1/2*1/2 | 48.3*21.3 | 45*18 | 64 |
50*40 | 2*1.1/2 | 60.3*48.3 | 57*45 | 76 |
50*32 | 2*1.1/4 | 60.3*42.4 | 57*38 | 76 |
50*25 | 2*1 | 60.3*33.7 | 57*32 | 76 |
50*20 | 2*3/4 | 60.3*26.9 | 57*25 | 76 |
65*50 | 2.1/2*2 | 73.0*60.3 | 76*57 | 89 |
65*40 | 2.1/2*1.1/2 | 73.0*48.3 | 76*45 | 89 |
65*32 | 2.1/2*1.1/4 | 73.0*42.4 | 76*38 | 89 |
65*25 | 2.1/2*1 | 73.0*33.7 | 76*32 | 89 |
80*65 | 3*2.1/2 | 88.9*73.0 | 89*76 | 89 |
80*50 | 3*2 | 88.9*60.3 | 89*57 | 89 |
80*40 | 3*1.1/2 | 88.9*48.3 | 89*45 | 89 |
80*32 | 3*1.1/4 | 88.9*42.4 | 89*38 | 89 |
90*80 | 3.1/2*3 | 101.6*88.9 | - | 102 |
90*65 | 3.1/2*2.1/2 | 101.6*73.0 | - | 102 |
90*50 | 3.1/2*2 | 101.6*60.3 | - | 102 |
90*40 | 3.1/2*1.1/2 | 101.6*48.3 | - | 102 |
90*32 | 3.1/2*1.1/4 | 101.6*42.4 | - | 102 |
100*90 | 4*3.1/2 | 114.3*101.6 | - | 102 |
100*80 | 4*3 | 114.3*88.9 | 108*89 | 102 |
100*65 | 4*2.1/2 | 114.3*73.0 | 108*76 | 102 |
100*50 | 4*2 | 114.3*60.3 | 108*57 | 102 |
100*40 | 4*1.1/2 | 114.3*48.3 | 108*45 | 102 |
125*100 | 5*4 | 141.3*114.3 | 133*108 | 127 |
125×90 | 5×3.1/2 | 141.3×101.6 | - | 127 |
125*80 | 5*3 | 141.3*88.9 | 133*89 | 127 |
125*65 | 5*2.1/2 | 141.3*73.0 | 133*76 | 127 |
125*50 | 5*2 | 141.3*60.3 | 133*57 | 127 |
150*125 | 6*5 | 168.3*141.3 | 159*133 | 140 |
150*100 | 6*5 | 168.3*114.3 | 159*108 | 140 |
150*90 | 6*3.1/2 | 168.3*101.6 | - | 140 |
150*80 | 6*3 | 168.3*88.9 | 159*89 | 140 |
150*65 | 6*2.1/2 | 168.3*73.0 | 159*76 | 140 |
200*150 | 8*6 | 219.1*168.3 | 219*159 | 152 |
200*125 | 8*5 | 219.1*141.3 | 219*133 | 152 |
200*100 | 8*4 | 219.1*114.3 | 219*108 | 152 |
200*90 | 8*3.1/2 | 219.1*101.6 | - | 152 |
250*200 | 10*8 | 273.0*219.1 | 273*219 | 178 |
250*150 | 10*6 | 273.0*168.3 | 273*159 | 178 |
250*125 | 10*5 | 273.0*141.3 | 273*133 | 178 |
250*100 | 10*4 | 273.0*114.3 | 273*108 | 178 |
300*250 | 12*10 | 323.9*273.1 | 325*273 | 203 |
300*200 | 12*8 | 323.9*219.1 | 325*219 | 203 |
300*150 | 12*6 | 323.9*168.3 | 325*159 | 203 |
300*125 | 12*5 | 323.9*141.3 | 325*133 | 203 |
350*300 | 14*12 | 355.6*323.9 | 377*325 | 330 |
350*250 | 14*10 | 355.6*273.0 | 377*273 | 330 |
350*200 | 14*8 | 355.6*219.1 | 377*219 | 330 |
350*150 | 14*6 | 355.6*168.3 | 377*159 | 330 |
400*350 | 16*14 | 406.4*355.6 | 426*377 | 356 |
400*300 | 16*12 | 406.4*323.9 | 426*325 | 356 |
400*250 | 16*10 | 406.4*273.0 | 426*273 | 356 |
400*200 | 16*8 | 406.4*219.1 | 426*219 | 356 |
450*400 | 18*16 | 457*406.4 | 478*426 | 381 |
450*350 | 18*14 | 457*355.6 | 478*377 | 381 |
450*300 | 18*12 | 457*323.9 | 478*325 | 381 |
450*250 | 18*10 | 457*273.0 | 478*273 | 381 |
500*450 | 20*18 | 508*457 | 529*478 | 508 |
500*400 | 20*16 | 508*406.4 | 529*426 | 508 |
500*350 | 20*14 | 508*355.6 | 529*377 | 508 |
500*300 | 20*12 | 508*323.9 | 529*325 | 508 |
550*500 | 22*20 | 559*508 | - | 508 |
550*450 | 22*18 | 559*457 | - | 508 |
550*400 | 22*16 | 559*406.4 | - | 508 |
550*350 | 22*14 | 559*355.6 | - | 508 |
600*550 | 24*22 | 610*559 | - | 508 |
600*500 | 24*20 | 610*508 | 630*529 | 508 |
600*450 | 24*18 | 610*457 | 630*478 | 508 |
600x400 | 24×22 | 610×406.4 | 630×426 | 508 |
650×600 | 26×24 | 660×610 | - | 610 |
Grade Of Alloy Steel Buttweld Eccentric Reducer
Carbon Steel Reducer Tolerance
NPS | Outer Diameter at Bevel | Inner Diameter at End | Wall Thickness Of t / t1 |
Overall Length Of H |
1/2 a 2 1/2 | 1 | 0,8 | Not | 2 |
3 a 3 1/2 | 1 | 1,6 | less | 2 |
4 | +2 -1 | 1,6 | than | 2 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 2 |
8 | 2 | 1,6 | of nominal | 2 |
10 | +4 -3 | 3,2 | tickness | 2 |
12 a 18 | +4 -3 | 3,2 | 3 | |
20 a 24 | +6 -5 | 4,8 | 3 | |
26 a 30 | +7 -5 | 4,8 | 3 | |
32 a 48 | +7 -5 | 4,8 | 5 |
SS Eccentric Reducer Weight Chart
Normal Pipe Size | Weight In LBS | Weight In KG |
3/4-1/2 | 0.17 | 0.08 |
3/4-3/8 | 0.15 | 0.07 |
1-3/4 | 0.4 | 0.18 |
1-1/2 | 0.4 | 0.18 |
1.1/4-1 | 0.5 | 0.23 |
1.1/4-3/4 | 0.4 | 0.18 |
1.1/4-1/2 | 0.4 | 0.18 |
1.1/2-1.1/4 | 0.7 | 0.32 |
1.1/2-1 | 0.62 | 0.28 |
1.1/2-3/4 | 0.54 | 0.24 |
1.1/2-1/2 | 0.5 | 0.23 |
2-1.1/2 | 0.9 | 0.41 |
2-1.1/4 | 0.84 | 0.38 |
2-1 | 0.76 | 0.34 |
2-3/4 | 0.7 | 0.32 |
2.1/2-2 | 1.5 | 0.68 |
2.1/2-1.1/2 | 1.38 | 0.63 |
2.1/2-1.1/4 | 1.25 | 0.57 |
2.1/2-1 | 1.25 | 0.57 |
3-2.1/2 | 2 | 0.91 |
3-2 | 1.8 | 0.82 |
3-1.1/2 | 1.7 | 0.77 |
3-1.1/4 | 1.6 | 0.73 |
3.1/2-3 | 3.15 | 1.43 |
3.1/2-2.1/2 | 2.88 | 1.31 |
3.1/2-2 | 2.75 | 1.25 |
3.1/2-1.1/2 | 2.5 | 1.13 |
3.1/2-1.1/4 | 2.4 | 1.09 |
4-3.1/2 | 3.5 | 1.59 |
4-3 | 3.38 | 1.53 |
4-2.1/2 | 3.25 | 1.47 |
4-2 | 3 | 1.36 |
4-1.1/2 | 2.88 | 1.31 |
5-4 | 6 | 2.72 |
5-3.1/2 | 5.75 | 2.61 |
5-3 | 5.5 | 2.49 |
5-2.1/2 | 5.25 | 2.38 |
5-2 | 5 | 2.27 |
6-5 | 8.5 | 3.86 |
6-4 | 8.25 | 3.74 |
6-3.1/2 | 8.25 | 3.74 |
6-3 | 8 | 3.63 |
6-2.1/2 | 7.25 | 3.29 |
8-6 | 13.2 | 5.99 |
8-5 | 12 | 5.44 |
8-4 | 11 | 4.99 |
8-3.1/2 | 11 | 4.99 |
10-8 | 22 | 9.98 |
10-6 | 21.5 | 9.75 |
10-5 | 21 | 9.53 |
10-4 | 20 | 9.07 |
12-10 | 34 | 15.42 |
12-8 | 32 | 14.51 |
12-6 | 31 | 14.06 |
12-5 | 30 | 13.61 |
14-12 | 60 | 27.22 |
14-10 | 59.2 | 26.85 |
14-8 | 58.5 | 26.54 |
14-6 | 58 | 26.31 |
16-14 | 71 | 32.21 |
16-12 | 70 | 31.75 |
16-10 | 69.5 | 31.52 |
16-8 | 68.5 | 31.07 |
16-6 | - | - |
18-16 | 85 | 38.56 |
18-14 | 84 | 38.1 |
18-12 | 83 | 37.65 |
18-10 | 82 | 37.19 |
18-8 | - | - |
20-18 | 125 | 56.7 |
20-16 | 124 | 56.25 |
20-14 | 122 | 55.34 |
20-12 | 120 | 54.43 |
20-10 | - | - |
20-8 | - | - |
22-20 | 142 | 64.41 |
22-18 | 138 | 62.6 |
22-16 | 131 | 59.42 |
22-14 | 123 | 55.79 |
22-12 | - | - |
22-10 | - | - |
24-22 | - | - |
24-20 | 150 | 68.04 |
24-18 | 148 | 67.13 |
24-16 | 145 | 65.77 |
24-14 | - | - |
24-12 | - | - |
24-10 | - | - |
26-24 | 207 | 93.89 |
26-22 | 200 | 90.72 |
26-20 | 190 | 86.18 |
26-18 | 182 | 82.55 |
26-16 | - | - |
26-14 | - | - |
26-12 | - | - |
28-26 | 224 | 101.6 |
28-24 | 216 | 97.98 |
28-22 | 210 | 95.25 |
28-20 | 199 | 90.26 |
30-28 | 241 | 109.32 |
30-26 | 232 | 105.23 |
30-24 | 224 | 101.6 |
30-22 | 220 | 99.79 |
30-20 | 220 | 99.79 |
ASME B16 9 Concentric Reducer Weight
Normal Pipe Size Inch |
REDUCERS* | |||
Schedule 5S |
Schedule 10S |
Schedule 40S |
Schedule 80S |
|
1/2 | 0.04 | 0.04 | 0.05 | 0.06 |
3/4 | 0.10 | 0.10 | 0.14 | 0.18 |
1 | 0.12 | 0.12 | 0.16 | 0.22 |
1 1/4 | 0.18 | 0.18 | 0.22 | 0.27 |
1 1/2 | 0.21 | 0.21 | 0.28 | 0.33 |
2 | 0.30 | 0.30 | 0.40 | 0.55 |
2 1/2 | 0.45 | 0.45 | 0.80 | 1.00 |
3 | 0.50 | 0.50 | 0.90 | 1.20 |
4 | 0.80 | 0.80 | 1.50 | 2.20 |
5 | 1.40 | 1.40 | 2.70 | 3.70 |
6 | 2.00 | 2.00 | 4.00 | 5.80 |
8 | 3.10 | 3.10 | 6.90 | 9.30 |
10 | 4.80 | 4.80 | 10.5 | 14.5 |
12 | 9.00 | 9.00 | 19.0 | 25.0 |
14 | 15.5 | 15.5 | 31.0 | 41.5 |
16 | 19.0 | 19.0 | 38.0 | 50.5 |
18 | 23.0 | 23.0 | 46.0 | 61.5 |
20 | 34.0 | 34.0 | 58.5 | 78.0 |
24 | 50.0 | 50.0 | 75.0 | 100 |
NPS | No. Of schedule | Weight per KG | (Small) I.D. | (Small) Wall Thickness | (Large) O.D. | (Large) I.D. | (Large) Wall Thickness | (Small) O.D. | Length Of Concentric Reducer |
---|---|---|---|---|---|---|---|---|---|
12 x 4 | 40 | 35.8 | 4.026 | 0.237 | 12.75 | 11.938 | 0.406 | 4.5 | 8 |
16 x 6 | 40 | 96.5 | 6.06 | 0.28 | 16 | 15 | 0.5 | 6.62 | 14 |
18 x 8 | 40 | 131 | 7.976 | 0.322 | 18 | 16.876 | 0.562 | 8.62 | 15 |
20 x 10 | 40 | 205 | 10.02 | 0.365 | 20 | 18.812 | 0.594 | 10.75 | 20 |
20 x 8 | 40 | 205 | 7.976 | 0.322 | 20 | 18.812 | 0.594 | 8.62 | 20 |
24 x 10 | 40 | 285 | 10.02 | 0.365 | 24 | 22.624 | 0.688 | 10.75 | 20 |
24 x 12 | 40 | 285 | 11.938 | 0.406 | 24 | 22.624 | 0.688 | 12.75 | 20 |
24 x 14 | 40 | 285 | 13.124 | 0.438 | 24 | 22.624 | 0.688 | 14 | 20 |
12 x 10 | 40 | 35.8 | 10.02 | 0.365 | 12.75 | 11.938 | 0.406 | 10.75 | 8 |
12 x 5 | 40 | 35.8 | 5.044 | 0.258 | 12.75 | 11.938 | 0.406 | 5.56 | 8 |
12 x 6 | 40 | 35.8 | 6.06 | 0.28 | 12.75 | 11.938 | 0.406 | 6.62 | 8 |
12 x 8 | 40 | 35.8 | 7.976 | 0.322 | 12.75 | 11.938 | 0.406 | 8.62 | 8 |
14 x 10 | 40 | 68.6 | 10.02 | 0.365 | 14 | 13.124 | 0.438 | 10.75 | 13 |
14 x 12 | 40 | 68.6 | 11.938 | 0.406 | 14 | 13.124 | 0.438 | 12.75 | 13 |
14 x 6 | 40 | 68.6 | 6.06 | 0.28 | 14 | 13.124 | 0.438 | 6.62 | 13 |
14 x 8 | 40 | 68.6 | 7.976 | 0.322 | 14 | 13.124 | 0.438 | 8.62 | 13 |
16 x 10 | 40 | 96.5 | 10.02 | 0.365 | 16 | 15 | 0.5 | 10.75 | 14 |
16 x 12 | 40 | 96.5 | 11.938 | 0.406 | 16 | 15 | 0.5 | 12.75 | 14 |
16 x 14 | 40 | 96.5 | 13.124 | 0.438 | 16 | 15 | 0.5 | 14 | 14 |
16 x 8 | 40 | 96.5 | 7.976 | 0.322 | 16 | 15 | 0.5 | 8.62 | 14 |
18 x 10 | 40 | 131 | 10.02 | 0.365 | 18 | 16.876 | 0.562 | 10.75 | 15 |
18 x 12 | 40 | 131 | 11.938 | 0.406 | 18 | 16.876 | 0.562 | 12.75 | 15 |
18 x 14 | 40 | 131 | 13.124 | 0.438 | 18 | 16.876 | 0.562 | 14 | 15 |
18 x 16 | 40 | 131 | 15 | 0.5 | 18 | 16.876 | 0.562 | 16 | 15 |
20 x 12 | 40 | 205 | 11.938 | 0.406 | 20 | 18.812 | 0.594 | 12.75 | 20 |
20 x 14 | 40 | 205 | 13.124 | 0.438 | 20 | 18.812 | 0.594 | 14 | 20 |
20 x 16 | 40 | 205 | 15 | 0.5 | 20 | 18.812 | 0.594 | 16 | 20 |
20 x 18 | 40 | 205 | 16.876 | 0.562 | 20 | 18.812 | 0.594 | 18 | 20 |
24 x 16 | 40 | 285 | 15 | 0.5 | 24 | 22.624 | 0.688 | 16 | 20 |
24 x 18 | 40 | 285 | 16.876 | 0.562 | 24 | 22.624 | 0.688 | 18 | 20 |
24 x 20 | 40 | 285 | 18.812 | 0.594 | 24 | 22.624 | 0.688 | 20 | 20 |
Description | Hs Code |
---|---|
ASME B16.9 Reducer | 7307 |